Knife Steel Chart Mobile:
Mouse over element names to get quick help on its effects in the alloy.
For comparison with other alloys open steel composition graph builder & analyzer.
Select steels from the Interactive Knife Steel Composition Chart.
Generated 97418811 times.
D95-2(DIN) - Simple, though popular carbon blade steel, very popular with knife-makers as it is easily worked. Sort of the de-facto standard carbon steel that will rust easily. Typical hardness is in the 58-60HRC range. Several makers take it all the way up to 64-65HRC.
Sandvik makes a very pure equivalent of this steel under the Sandvik 20C Shock Absorber name. One of the main downsides is relatively low abrasive wear resistance as there isn't much in this alloy to form carbides.
Sandvik makes a very pure equivalent of this steel under the Sandvik 20C Shock Absorber name. One of the main downsides is relatively low abrasive wear resistance as there isn't much in this alloy to form carbides.
Manufacturing Technology - Ingot
Country - Germany(DE)
- Proprietary Equivalents
NOTE - Approximate composition based on manufacturer's or standard reference information and other alloys in the same reference group is shown.
* - Listed as an equivalent or replacement for alloys in this group.
Knife Steel Chart Mobile Support:
Help & support for the Knife Steel Chart for Android.Help & support for the Knife Steel Chart for iOS.
Thanks, Credits And References