Universal Cyclops 27S Knife Steel
Composition Analysis Graph, Equivalents And Overview

Version 4.36
Tweet ThisShare On FacebookStumbleUponDigg itShare on Del.icio.us

Home > Knives > Steels > Universal Cyclops
Google

Knife Steel Chart Mobile:

Mouse over element names to get quick help on its effects in the alloy.
For comparison with other alloys open steel composition graph builder & analyzer.
Select steels from the Interactive Knife Steel Composition Chart.

Generated 90393213 times.

27S(Universal Cyclops) - Water hardening tool steel. Quite popular with custom knife makers, beginners and seasoned experts alike. Easy to work with, decent edge holding and ok. toughness, depending on the heat treatment. Maximum working hardness is in 63-65 HRC Range. Obviously, you won't be getting much of the toughness at 65hrc, however edge holding and cutting performance for thin edges increase accordingly.
You can view W5 a tighter speced sub-group of AISI W1 steel, which is a very broad standard, at least as far as steel standards are concerned. Trace amount of Chromium serves primarily as a carbide former, may be adds something to alloy strength as well, but nothing in terms of stain resistance, too little of it(Cr). W5 maxes out 64-65HRC, and works quite well at that hardness levels as a light use knife. Pretty good with polished, thin edge at 64HRC. I've seen various types of knives in all sizes, starting from small folders and ending with rather large kitchen and utility knives. Overall, it's a decent steel, non-stainless, won't win any awards in abrasive wear resistance department, but will do variety of jobs.

Manufacturing Technology - Ingot

Country - United States(US)

NOTE - Approximate composition based on manufacturer's or standard reference information and other alloys in the same reference group is shown.

Knife Steel Chart Mobile Support:

Help & support for the Knife Steel Chart for Android.
Help & support for the Knife Steel Chart for iOS.
Thanks, Credits And References