|
Query Returned - 310 records. | 0170-6C*
| Fe | 0.95 | 0.45 | 0.00 | 0.00 | 0.40 | 0.00 | 0.00 | 0.00 | 0.03 | ? | ? | ? | 0.00 | 0.19 | | 50100-B | US | | 1.2008*
| Fe | 1.40 | 0.50 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.20 | 0.00 | 0.00 | | | DE | | 1.3355*
| Fe | 1.00 | 4.00 | 0.00 | 0.00 | ? | 0.70 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 19.00 | 1.10 | | 3355, HS18-0-1, S200, Gigant50, X74WV18.1, RapidSpezial, S18-0-1, Rekord, GWV112B, Presto2Kronen, NH18V, ThyRapid3355, SVX360, SVX360/Gr, SVX360/So | DE | | 1050
| Fe | 0.48-0.55 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | ? | 0.00 | 0.00 | | G10500 | US | | 1055
| Fe | 0.50-0.60 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | ? | 0.00 | 0.00 | | G10550 | US | | 1060
| Fe | 0.55-0.65 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.040 | 0.05 | ? | 0.00 | 0.00 | | G10600 | US | | 1070
| Fe | 0.65-0.75 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | ? | 0.00 | 0.00 | | G10700 | US | | 1074*
| Fe | 0.70-0.80 | 0.00 | 0.00 | 0.00 | 0.50-0.80 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | 0.20 | 0.00 | 0.00 | | 15LM, G10740 | US | | 1075*
| Fe | 0.70-0.80 | 0.00 | 0.00 | 0.00 | 0.40-0.70 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | ? | 0.00 | 0.00 | | DNH7, XC75 | US | | 1078*
| Fe | 0.72-0.85 | 0.00 | 0.00 | 0.00 | 0.30-0.60 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.05 | ? | 0.00 | 0.00 | | G10780 | US | | 1080
| Fe | 0.75-0.88 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.040 | 0.05 | ? | 0.00 | 0.00 | | G10800 | US | | 1084
| Fe | 0.80-0.93 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.040 | 0.05 | ? | 0.00 | 0.00 | | G10840 | US | | 1086
| Fe | 0.80-0.93 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.040 | 0.05 | ? | 0.00 | 0.00 | | G10860 | US | | 1090
| Fe | 0.85-0.98 | 0.00 | 0.00 | 0.00 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.040 | 0.05 | ? | 0.00 | 0.00 | | G10900, 90Mn4 | US | | 1095*
| Fe | 0.90-1.03 | 0.00-0.20 | 0.00 | 0.00 | 0.30-0.50 | 0.00 | 0.00 | 0.00 | 0.00 | 0.02-0.04 | 0.01-0.05 | 0.3 | 0.00 | 0.00 | | G10950, Sandvik 20C | US | | 1095 Cro-Van*
| Fe | 0.95-1.10 | 0.40-0.60 | 0.00 | 0.00 | 0.30-0.50 | 0.06 | 0.00 | 0.00 | 0.25 | ? | ? | ? | 0.00 | 0.161 | | 50-110B | US | | 11Cr17
| Fe | 0.95-1.20 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 1.00 | 0.00 | 0.00 | | | CN | | 120C*
| Fe | 0.58 | 14.00 | 0.00 | 0.00 | 0.35 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 0.00 | | Sandvik 120C | SW | | 12C27*
| Fe | 0.60 | 13.50 | 0.00 | 0.00 | 0.40 | 0.00 | 0.00 | 0.00 | 0.00 | 0.03 | 0.01 | 0.04 | 0.00 | 0.00 | | | SW | | 12C27M*
| Fe | 0.52 | 14.50 | 0.00 | 0.00 | 0.60 | 0.00 | 0.00 | 0.00 | 0.00 | 0.25 | 0.01 | 0.40 | 0.00 | 0.00 | | 12C27 Modified | SW | | 13C26*
| Fe | 0.68 | 13.00 | 0.00 | 0.00 | 0.70 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.010 | 0.40 | 0.00 | 0.00 | | | SW | | 14-4CrMo*
| Fe | 1.05 | 14.00 | 0.00 | 0.00 | 0.50 | 4.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.00 | 0.00 | | | US | | 14C28N*
| Fe | 0.62 | 14.00 | 0.00 | 0.00 | ? | 0.00 | 0.08 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | SW | | 154CM*
| Fe | 1.05 | 14.00 | 0.00 | 0.00 | 0.50 | 4.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.00 | 0.00 | | | US | | 15N20*
| Fe | 0.75 | 0.00 | 0.00 | 0.00 | 0.40 | 0.00 | 0.00 | 0.00 | 2.00 | 0.02 | 0.01 | 0.30 | 0.00 | 0.00 | | UBH-15N20 | SW | | 19C27*
| Fe | 0.95 | 13.50 | 0.00 | 0.00 | 0.70 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.10 | 0.40 | 0.00 | 0.00 | | | SW | | 1Cr17Mo
| Fe | 0.12 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.75-1.25 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 1.00 | 0.00 | 0.00 | | | CN | | 1K6*
| Fe | 0.60 | 13.50 | 0.00 | 0.00 | ? | 0.10 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | JP | | 301
| Fe | 0.15 | 16.00-18.00 | 0.00 | 0.00 | 2.00 | 0.00 | 0.00 | 0.00 | 6.00-8.00 | 0.045 | 0.03 | 1.00 | 0.00 | 0.00 | | ASTM A666 | JP | | 302
| Fe | 0.15 | 17.00-19.00 | 0.00 | 0.00 | 2.00 | 0.00 | 0.00 | 0.00 | 8.00-10.00 | 0.045 | 0.03 | 1.00 | 0.00 | 0.00 | | 07Cr18 Ni9 | US | | 303
| Fe | 0.15 | 17.00-19.00 | 0.00 | 0.00 | 2.00 | 0.00 | 0.00 | 0.00 | 8.00-10.00 | 0.045 | 0.03 | 1.00 | 0.00 | 0.00 | | | US | | 316L*
| Fe | 0.03 | 16.00-18.50 | 0.00 | 0.00 | 1.00-2.00 | 2.00-3.00 | 0.00 | 0.00 | 10.00-14.00 | 0.045 | 0.030 | 1.00 | 0.00 | 0.00 | | | US | | 3Cr13*
| Fe | 0.35 | 13.50 | 0.00 | 0.00 | 0.50 | 0.60 | 0.00 | 0.00 | 0.50 | ? | ? | 0.80 | 0.00 | 0.00 | | S-STAR, X40Cr13 | JP | | 4034*
| Fe | 0.42-0.50 | 12.50-14.50 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | 410
| Fe | 0.09-0.15 | 11.50-13.50 | 0.00 | 0.00 | 1.00 | 0.30 | 0.00 | 0.00 | 1.00 | 0.04 | 0.03 | 1.00 | 0.00 | 0.00 | | 410S21 | US | | 4116*
| Fe | 0.45-0.55 | 14.00-15.00 | 0.00 | 0.00 | ? | 0.50-0.80 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.10-0.20 | | | DE | | 4140*
| Fe | 0.38-0.43 | 0.80-1.10 | 0.00 | 0.00 | 0.75-1.00 | 0.15-0.25 | 0.00 | 0.00 | 0.00 | 0.035 | 0.04 | 0.15-0.35 | 0.00 | 0.00 | | ASTM A193, B7, B7M, UNS G41400 | US | | 4150
| Fe | 0.48-0.53 | 0.80-1.10 | 0.00 | 0.00 | 0.75-1.00 | 0.15-0.25 | 0.00 | 0.00 | 0.00 | 0.035 | 0.04 | 0.15-0.30 | 0.00 | 0.00 | | | US | | 416*
| Fe | 0.09-0.15 | 11.50-13.50 | 0.00 | 0.00 | 1.50 | 0.60 | 0.00 | 0.00 | 0.01 | 0.06 | 0.15-0.35 | 1.00 | 0.00 | 0.00 | | 416S21 | US | | 420
| Fe | 0.40-0.50 | 12.00-14.00 | 0.00 | 0.09 | 0.20 | 0.00-0.01 | 0.00 | 0.00 | 0.31 | 0.025 | 0.010 | 0.30 | 0.00 | 0.02 | | X42Cr13, PK4EX, 902, C4175, 1.2083, X45Cr13 | US | | 420 CW*
| Fe | 2.25 | 12.80 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.25 | MM | | US | | 420HC*
| Fe | 0.46 | 13.00 | 0.00 | 0.00 | 0.40 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.30 | | | US | | 420J2
| Fe | 0.15 | 12.00-14.00 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 1.00 | 0.00 | 0.00 | | | US | | 420M*
| Fe | 0.38 | 13.60 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | 0.03 | 0.75 | 0.00 | 0.30 | | 420 Modified, CSM® 420 XL | US | | 425M
| Fe | 0.40-0.54 | 13.50-15.00 | 0.00 | 0.00 | 0.50 | 0.60-1.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 0.80 | 0.00 | 0.10 | | 425 modified | US | | 430
| Fe | 0.12 | 14.0-18.0 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.60 | 0.04 | 0.03 | 0.75 | 0.00 | 0.00 | | | US | | 440 N-DUR*
| Fe | 0.58 | 15.00 | 0.00 | 0.00 | 0.45 | 0.50 | 0.17 | 0.00 | 0.00 | 0.01 | 0.001 | 0.30 | 0.00 | 0.00 | | | US | | 440A
| Fe | 0.65-0.75 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.75 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 1.00 | 0.00 | 0.00 | | | US | | 440B
| Fe | 0.75-0.95 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.75 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 1.00 | 0.00 | 0.00 | | | US | | 440C
| Fe | 0.95-1.20 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.75 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 1.00 | 0.00 | 0.00 | | | US | | 440V
| Fe | 2.20 | 17.00 | 0.00 | 0.00 | 0.40 | 0.40 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 5.50 | | | US | | 440XH
| Fe | 1.60 | 16.00 | 0.00 | 0.00 | 0.50 | 0.80 | 0.00 | 0.00 | 0.35 | ? | ? | 0.40 | 0.00 | 0.45 | | | US | | 50CrMoV13-1*
| Fe | 0.50 | 3.25 | 0.00 | 0.00 | 0.70 | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.25 | | OH253 | DE | | 5150
| Fe | 0.48-0.53 | 0.70-0.90 | 0.00 | 0.00 | 0.70-0.90 | 0.15-0.25 | 0.00 | 0.00 | 0.00 | 0.035 | 0.04 | 0.15-0.30 | 0.00 | 0.00 | | | US | | 5160*
| Fe | 0.56-0.64 | 0.60-1.05 | 0.00 | 0.00 | 0.75-1.00 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.15-0.35 | 0.00 | 0.00 | | | US | | 5180
| Fe | 0.60 | 0.80 | 0.00 | 0.00 | 0.80 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | 52100*
| Fe | 0.90-1.10 | 1.30-1.66 | 0.00 | 0.00-0.30 | 0.25-0.45 | 0.00 | 0.00 | 0.00 | 0.30 | 0.025-0.030 | 0.025 | 0.15-0.30 | 0.00 | 0.00 | | SR-101, SUJ2, GCr15, 100Cr6, 1.3505, WL 1.3505, W3 Platestahl, W3Decoll, TEW100Cr6, VE100Cr6, R100, SKL, Pantanax200, Extra-E | US | | 5Cr15MoV
| Fe | 0.45-0.50 | 14.50-15.00 | 0.00 | 0.00 | 0.40 | 0.60 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.10 | | | CN | | 6150
| Fe | 0.48-0.53 | 0.80-1.10 | 0.00 | 0.00 | 0.70-0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.04 | 0.15-0.30 | 0.00 | 0.00 | | | US | | 7Cr17*
| Fe | 0.60-0.75 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 1.00 | 0.00 | 0.00 | | | CN | | 8670*
| Fe | 0.64-0.75 | 0.30-0.50 | 0.00 | 0.00 | 0.40-0.60 | 0.08-0.15 | 0.00 | 0.00 | 0.70-1.00 | 0.025 | 0.025 | 0.20-0.35 | 0.00 | 0.00 | | 0186 | US | | 8A*
| Fe | 0.15 | 0.36 | 0.00 | 0.00 | 1.03 | 0.44 | 0.00 | 0.00 | 0.00 | ? | ? | 0.33 | 0.00 | 0.00 | | | JP | | 8Cr13MoV
| Fe | 0.80 | 13.00 | 0.00 | 0.00 | 0.40 | 0.15 | 0.00 | 0.00 | 0.20 | 0.02 | 0.01 | 0.50 | 0.00 | 0.10 | | | CN | | 8Cr17
| Fe | 0.75-0.95 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 1.00 | 0.00 | 0.00 | | | CN | | 90MnCrV8
| Fe | 0.50-0.60 | 0.30 | 0.00 | 0.00 | 0.70-0.90 | 0.25-0.45 | 0.00 | 0.00 | 0.00 | ? | ? | 1.70-2.10 | 0.00 | 0.00 | | 1.2842 | DE | | 9Cr13CoMoV
| Fe | 0.85 | 13.00 | 1.00 | 0.00 | 1.00 | 0.20 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.20 | | | CN | | 9Cr16MoV
| Fe | 0.95 | 16.00 | 0.00 | 0.00 | 0.30 | 0.50 | 0.00 | 0.00 | 0.10 | 0.02 | 0.01 | 0.50 | 0.00 | 0.10 | | | CN | | 9Cr18
| Fe | 0.90-1.00 | 17.00-19.00 | 0.00 | 0.00 | 0.80 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 0.80 | 0.00 | 0.00 | | WNr4543, Z100CD17 | CN | | 9Cr18Mo*
| Fe | 0.95-1.10 | 16.00-18.00 | 0.00 | 0.00 | 0.80 | 0.40-0.70 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 0.80 | 0.00 | 0.00 | | SUS440C, 440C, X110CrMo18 | CN | | 9Cr18MoV
| Fe | 0.85-0.95 | 17.00-19.00 | 0.00 | 0.00 | 0.80 | 1.00-1.30 | 0.00 | 0.00 | 0.00 | 0.035 | 0.03 | 0.80 | 0.00 | 0.07-0.12 | | | CN | | A10*
| Fe | 1.35 | 0.00 | 0.00 | 0.00 | 1.80 | 1.50 | 0.00 | 0.00 | 1.85 | ? | ? | 1.20 | 0.00 | 0.00 | | A681, Graph-Air® | US | | A11*
| Fe | 2.45 | 5.25-5.45 | 0.00 | 0.00 | 0.50 | 1.30 | 0.00 | 0.00 | 0.00 | ? | 0.07 | 0.90 | 0.00 | 9.75-9.80 | CPM/MM/PM | pmA11, CPM10V, T 30111, Duratech A11 | US | | A11 LVC*
| Fe | 1.85 | 5.30 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.00 | MM | | US | | A18
| Fe | 0.83 | 7.75 | 0.00 | 0.00 | 0.35 | 1.55 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 2.15 | | | US | | A2*
| Fe | 1.00 | 5.25-5.30 | 0.00 | 0.00 | 0.60-0.85 | 1.10 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30-0.35 | 0.00 | 0.20-0.25 | | A-2, OA2, C4756, 1.2363, X100CrMoV5-1, Airkool, Rigor | US | | A3
| Fe | 1.20-1.30 | 4.75-5.50 | 0.00 | 0.00 | 0.40-0.60 | 0.90-1.40 | 0.00 | 0.00 | 0.30 | 0.03 | ? | 0.50 | 1.00 | 0.80-1.40 | | | US | | A4
| Fe | 1.00 | 1.00 | 0.00 | 0.00 | 2.00 | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | A6
| Fe | 1.00 | 1.00 | 0.00 | 0.00 | 2.00 | 1.40 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.00 | 0.00 | | CSM 6 | US | | A7
| Fe | 2.25 | 5.25 | 0.00 | 0.00 | ? | 1 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.00 | 4.75 | | | US | | A8
| Fe | 0.55 | 5.00 | 0.00 | 0.00 | 0.30 | 1.25 | 0.00 | 0.00 | 0.00 | ? | ? | 0.95 | 1.25 | 0.00 | | | US | | A9
| Fe | 0.50 | 5.20 | 0.00 | 0.00 | 0.30 | 1.40 | 0.00 | 0.00 | 1.40 | ? | ? | 1.00 | 0.00 | 1.00 | | | US | | ACUTO440*
| Fe | 1.00 | 17.50 | 0.00 | 0.00 | 0.50 | 1.40 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.20 | | ACUTO 440 | JP | | AEB-H*
| Fe | 1.00 | 13.50 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | AEB-L*
| Fe | 0.67 | 13.00 | 0.00 | 0.00 | 0.60 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.015 | 0.40 | 0.00 | 0.00 | | | SW | | AN-58*
| Fe | 0.45 | 13.50 | 0.00 | 0.00 | 0.49 | 0.01 | 0.00 | 0.00 | 0.00 | 0.02 | ? | 0.34 | 0.00 | 0.02 | | | DE | | Aogami 1
| Fe | 1.30-1.40 | 0.30 | 0.00 | 0.00 | 0.20 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 1.50 | 0.00 | | Blue 1, Ao-Ko, Ao-ichi-ko | JP | | Aogami 2
| Fe | 1.10-1.20 | 0.20 | 0.00 | 0.00 | 0.20 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 1.00 | 0.00 | | Ao-Ko 2, Ao-Ko II, Blue 2 | JP | | Aogami Super
| Fe | 1.40 | 0.30 | 0.00 | 0.00 | 0.20 | 0.30 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 2.00 | 0.30 | | Blue Super | JP | | Arne*
| Fe | 0.95 | 0.60 | 0.00 | 0.00 | 1.10 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.60 | 0.10 | | O1, 1.2510 | SW | | ATS-34
| Fe | 1.05 | 14.00 | 0.00 | 0.00 | 0.40 | 4.00 | 0.00 | 0.00 | 0.00 | 0.03 | 0.02 | 0.35 | 0.00 | 0.00 | | | JP | | ATS-55
| Fe | 1.00 | 14.00 | 0.40 | 0.20 | 0.50 | 0.60 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.00 | | | JP | | AUS-118
| Fe | 0.90-0.95 | 17.00-18.00 | 0.00 | 0.00 | 0.50 | 1.30-1.50 | 0.00 | 0.00 | 0.00 | 0.04 | 0.03 | 0.50 | 0.00 | 0.10-0.25 | | | JP | | AUS-6M
| Fe | 0.55 | 13.00-14.50 | 0.00 | 0.00 | 1.00 | 0.10-0.30 | 0.00 | 0.00 | 0.49 | 0.04 | 0.03 | 1.00 | 0.00 | 0.10-0.30 | | | JP | | AUS10*
| Fe | 0.95-1.10 | 13.00-14.50 | 0.00 | 0.00 | 0.50 | 0.10-0.31 | 0.00 | 0.00 | 0.49 | 0.04 | 0.03 | 1.00 | 0.00 | 0.10-0.27 | | AUS10A | JP | | AUS4*
| Fe | 0.40-0.45 | 13.00-14.50 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.49 | ? | 0.03 | ? | 0.00 | 0.00 | | | JP | | AUS6*
| Fe | 0.55-0.65 | 13.00-14.50 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.49 | 0.04 | 0.03 | 1.00 | 0.00 | 0.10-0.25 | | AUS-6, AUS6, 6A, AUS6A | JP | | AUS60*
| Fe | 0.60-0.75 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.75 | 0.00 | 0.00 | 0.60 | ? | ? | 1.00 | 0.00 | 0.00 | | 18Cr | JP | | AUS8*
| Fe | 0.70-0.75 | 13.00-14.50 | 0.00 | 0.00 | 0.50 | 0.10-0.30 | 0.00 | 0.00 | 0.49 | 0.04 | 0.03 | 1.00 | 0.00 | 0.10-0.26 | | A8, 8A, AUS8A | JP | | BG42*
| Fe | 1.15 | 14.50 | 0.00 | 0.00 | 0.50 | 4.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.00 | 1.20 | | | US | | C-70
| Fe | 0.70 | 0.03 | 0.00 | 0.00 | 0.71 | 0.20 | 0.00 | 0.00 | 0.00 | ? | ? | 0.25 | 0.00 | 0.00 | | | ? | | C-75
| Fe | 0.70 | 0.00 | 0.00 | 0.00 | 0.80 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.00 | | C75 | ? | | C80W1*
| Fe | 0.75-0.85 | 0.00 | 0.00 | 0.00 | 0.10-0.25 | 0.00 | 0.00 | 0.00 | 0.00 | 0.020 | 0.020 | 0.10-0.25 | 0.00 | 0.00 | | 1.1525, C80 W 1 | DE | | Caldie*
| Fe | 0.70 | 5.00 | 0.00 | 0.00 | 0.50 | 2.30 | 0.00 | 0.00 | 0.00 | ? | ? | 0.20 | 0.00 | 0.50 | | | SW | | Calmax*
| Fe | 0.60 | 4.50 | 0.00 | 0.00 | 0.80 | 0.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 0.20 | | | SW | | Carbon V*
| Fe | 0.95 | 0.48 | 0.00 | 0.46 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.16 | 0.00 | 0.19 | | 0170-6C | US | | Chipper*
| Fe | 0.51 | 4.80 | 0.00 | 0.00 | 0.34 | 1.99 | 0.00 | 0.00 | 0.32 | ? | ? | 0.40 | 0.00 | 0.00 | | Duracat Chipper Knife Steel | US | | Cowry-X*
| Fe | 3.00 | 20.00 | 0.00 | 0.00 | ? | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.30 | PM | | JP | | Cowry-Y*
| Fe | 1.20 | 14.00 | 0.00 | 0.00 | ? | 3.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 1.00 | PM | | JP | | CP8E
| Fe | 0.85 | 7.70 | 0.00 | 0.00 | 1.50 | 2.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | CN | | CPM 15V*
| Fe | 3.40 | 5.25 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 14.50 | CPM | 15V | US | | CPM 1V*
| Fe | 0.55 | 4.50 | 0.00 | 0.00 | ? | 2.75 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 2.15 | 1.00 | CPM | 1V | US | | CPM 3V*
| Fe | 0.80 | 7.50 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 2.75 | CPM | | US | | CPM 9V
| Fe | 1.90 | 5.25 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.10 | CPM | | US | | CPM D2
| Fe | 1.55 | 11.50 | 0.00 | 0.00 | ? | 0.90 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.80 | CPM | | US | | CPM M35*
| Fe | 0.98 | 4.05 | 5.00 | 0.00 | 0.70 | 0.00 | 5.00 | 0.00 | 0.00 | ? | 0.22 | 0.40 | 6.00 | 2.00 | CPM | M35(AISI), REX M35HCHS | US | | CPM M4*
| Fe | 1.42 | 4.00 | 0.00 | 0.00 | 0.30 | 5.25 | 0.00 | 0.00 | 0.00 | ? | 0.06 | ? | 5.50 | 4.00 | | CPM Rex M4(HC), M4 | US | | CPM REX 121*
| Fe | 3.40 | 4.00 | 9.00 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | 0.03-0.12 | ? | 10.00 | 9.50 | CPM | CPM REX 121(HS) | US | | CPM Rex 20*
| Fe | 1.30 | 3.75 | 0.00 | 0.00 | ? | 10.50 | 0.00 | 0.00 | 0.00 | ? | 0.06 | ? | 6.25 | 2.00 | | | US | | CPM Rex 45*
| Fe | 1.30 | 4.05 | 8.00 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | 0.06 | ? | 6.25 | 3.05 | | | US | | CPM Rex 54*
| Fe | 1.48 | 4.00 | 5.00 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | 0.06 | ? | 5.50 | 3.75 | CPM | M4HC + Co | US | | CPM S110V*
| Fe | 2.80 | 14.00 | 2.00 | 0.00 | ? | 3.50 | 0.00 | 3.50 | 0.00 | ? | ? | ? | 0.00 | 9.00 | CPM | | US | | CPM S125V*
| Fe | 3.25 | 14.00 | 0.00 | 0.00 | ? | 2.50 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 12.00 | CPM | | US | | CPM S30V*
| Fe | 1.45 | 14.00 | 0.00 | 0.00 | ? | 2.00 | 0.10 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 4.00 | CPM | S30V | US | | CPM S35VN*
| Fe | 1.10 | 14.00 | 0.00 | 0.00 | ? | 2.00 | 0.01 | 5.00 | 0.00 | ? | ? | ? | 0.00 | 3.00 | CPM | S35VN | US | | CPM S60V
| Fe | 2.15 | 17.00 | 0.00 | 0.00 | 0.40 | 0.40 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 5.50 | CPM | 440V, CP-T-440V | US | | CPM S90V
| Fe | 2.30 | 14.00 | 0.00 | 0.00 | ? | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.00 | CPM | CPM 420V | US | | CPM154*
| Fe | 1.05 | 14.00 | 0.00 | 0.00 | ? | 4.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.25 | CPM | | US | | CPOH*
| Fe | 1.00 | 8.00 | 0.00 | 0.00 | 2.50 | 0.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | DE | | Cr12Mov
| Fe | 1.57 | 11.65 | 0.00 | 0.00 | 0.27 | 0.41 | 0.00 | 0.00 | 0.16 | ? | ? | ? | 0.00 | 0.17 | | | ? | | CRB-7
| Fe | 1.10 | 14.00 | 0.00 | 0.00 | 0.40 | 2.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 1.00 | 0.00 | | | ? | | CROMOVA 18*
| Fe | ? | 18.00 | 0.00 | 0.00 | ? | ? | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | ? | | | JP | | CRU-WEAR
| Fe | 1.10 | 7.25 | 0.00 | 0.00 | ? | 1.60 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.15 | 2.40 | | | US | | CruForgeV*
| Fe | 1.05 | 0.50 | 0.00 | 0.00 | 075 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.75 | | 1086 | US | | CRV1*
| Fe | 0.96-0.98 | 11.30-11.50 | 0.00 | 0.13 | 0.24-0.30 | 0.90-0.98 | 0.00 | 0.00 | 0.15 | 0.023 | 0.026 | 0.17-0.30 | 0.00 | 0.90-0.92 | | 831, C4851, 1.2376, X96CrMoV12 | SI | | CRV2*
| Fe | 0.50 | 8.50 | 0.00 | 0.00 | 0.50 | 1.20 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90 | 1.20 | 0.00 | | 1.2631, X50CrMoW9-1-1, 832 | SI | | CSN 14160*
| Fe | 0.50-0.60 | 0.30-0.50 | 0.00 | 0.30 | 0.70-1.00 | 0.00 | 0.00 | 0.00 | 0.40 | 0.04 | 0.04 | 0.30-0.50 | 0.00 | 0.00 | | | CZ | | CSN 14260*
| Fe | 0.50-0.60 | 0.50-0.70 | 0.00 | 0.30 | 0.50-0.80 | 0.00 | 0.00 | 0.00 | 0.50 | 0.035 | 0.035 | 1.30-1.60 | 0.00 | 0.00 | | 54 SiCr6 | CZ | | CSN 17024
| Fe | 0.36-0.45 | 12.00-14.00 | 0.00 | 0.00 | 0.80 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.035 | 0.70 | 0.00 | 0.00 | | N 540 | CZ | | CSN 17029*
| Fe | 0.40-0.50 | 14.00-16.00 | 0.00 | 0.00 | 0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.035 | 0.70 | 0.00 | 0.00 | | N 540 | CZ | | CSN 17042*
| Fe | 0.90-1.05 | 16.00-18.00 | 0.00 | 0.00 | 0.90 | 0.00 | 0.00 | 0.00 | 0.00 | 0.04 | 0.035 | 0.70 | 0.00 | 0.00 | | | CZ | | CSN 19800*
| Fe | 0.75-0.85 | 3.80-4.60 | 0.00 | 0.00 | 0.45 | 0.50 | 0.00 | 0.00 | 0.00 | 0.035 | 0.035 | 0.45 | 8.00-9.50 | 1.30-2.00 | | | CZ | | CSN 19802*
| Fe | 0.80-0.90 | 3.80-4.60 | 0.00 | 0.00 | 0.45 | 0.50 | 0.00 | 0.00 | 0.00 | 0.035 | 0.035 | 0.45 | 9.50-11.00 | 2.00-2.70 | | S 208 | CZ | | D2*
| Fe | 1.50-1.60 | 11.50-12.00 | 0.00 | 0.00 | 0.15-0.45 | 0.60-0.90 | 0.00 | 0.00 | 0.00 | 0.03 | 0.03 | 0.10-0.40 | 0.00 | 0.90-1.10 | | SKD11, HICRO 150, Sverker 21, 1.2379, Cr12, T21200, AIRDI 150 | US | | D3*
| Fe | 1.90-2.20 | 11.00-12.00 | 0.00 | 0.15 | 0.15-0.45 | 0.02 | 0.00 | 0.00 | 0.31 | 0.03 | 0.03 | 0.10-0.40 | 0.00 | 0.04 | | X210Cr12, OCR12, 812, C4150, 1.2080, SKD-1, SKD 1 | US | | D4*
| Fe | 2,25 | 11.50 | 0.00 | 0.00 | ? | 0.80 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.20 | | | US | | D5*
| Fe | 1.50 | 11.65 | 2.80 | 0.00 | 0.35 | 0.80 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.00 | | | US | | D6*
| Fe | 2.12 | 12.12 | 0.00 | 0.00 | 0.33 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.21 | 0.81 | 0.00 | | BS4659, X210CrW12 | DE | | D7*
| Fe | 2.15-2.50 | 11.50-13.50 | 0.00 | 0.00 | 0.40-0.60 | 0.70-1.20 | 0.00 | 0.00 | 0.30 | ? | ? | 0.40-0.60 | 0.00 | 3.80-4.40 | | HICRO 230 | US | | DC53*
| Fe | 1.00 | 8.00 | 0.00 | 0.00 | 0.40 | 2.00 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.30 | | | US | | DM1
| Fe | 0.95 | 0.45 | 0.00 | 0.00 | 0.46 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.19 | | | ? | | Double Six*
| Fe | 0.85 | 4.15 | 0.00 | 0.00 | 0.28 | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 6.15 | 1.85 | | M2 | US | | DuraTech 20CV*
| Fe | 1.90 | 20.00 | 0.00 | 0.00 | 0.30 | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.60 | 4.00 | PM | DuraTech 20CV, 20CV | US | | DuraTech A11*
| Fe | 2.45 | 5.45 | 0.00 | 0.00 | 0.50 | 1.35 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90 | 0.00 | 9.80 | PM | | US | | DuraTech M4*
| Fe | 1.45 | 4.50 | 0.00 | 0.00 | 0.25 | 5.20 | 0.00 | 0.00 | 0.00 | ? | ? | 0.25 | 5.50 | 3.85 | PM | | US | | DuraTech Mega4*
| Fe | 1.50 | 4.00 | 0.00 | 0.00 | ? | 2.50 | 0.00 | 0.00 | 0.00 | ? | 0.010 | ? | 2.50 | 4.00 | PM | | US | | DuraTech Pyrovan HC*
| Fe | 0.85 | 5.00 | 0.00 | 0.00 | 0.30 | 1.35 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 2.75 | PM | Pyrovan HC | US | | DuraTech Xtreme*
| Fe | 0.55 | 4.00 | 0.00 | 0.00 | 0.40 | 4.25 | 0.00 | 0.00 | 0.50 | ? | 0.010 | 0.50 | 0.00 | 1.00 | PM | DuraTech Extreme | US | | Elmax*
| Fe | 1.70 | 18.00 | 0.00 | 0.00 | 0.30 | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.80 | 0.00 | 3.00 | PM | Elmax SuperClean3, UHB Elmax | SW | | G2
| Fe | 0.90 | 15.50 | 0.00 | 0.00 | 0.60 | 0.30 | 0.00 | 0.00 | 0.00 | 0.02 | 0.03 | 0.37 | 0.00 | 0.00 | | G-2 | JP | | GIN-1*
| Fe | 0.80-0.90 | 15.00-17.00 | 0.00 | 0.00 | 0.45-0.75 | 0.30-0.50 | 0.00 | 0.00 | 0.00 | 0.030 | 0.020 | 0.35 | 0.00 | 0.00 | | G2, Gingami-1 | JP | | GIN-3*
| Fe | 0.95-1.10 | 13.00-14.50 | 0.00 | 0.00 | 0.60-1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.030 | 0.020 | 0.35 | 0.00 | 0.00 | | Gingami-3 | JP | | GIN-5*
| Fe | 0.60-0.70 | 12.50-13.50 | 0.00 | 0.00 | 0.60-0.80 | 0.00 | 0.00 | 0.00 | 0.00 | 0.03 | 0.02 | 0.35 | 0.00 | 0.00 | | GIN5, Gingami 5 | JP | | H1*
| Fe | 0.15 | 14.00-16.00 | 0.00 | 0.10 | 2.00 | 0.50-1.50 | 0.10 | 0.00 | 6.00-8.00 | 0.04 | 0.03 | 3.00-4.50 | 0.00 | 0.00 | | H-1 | US | | HAP40*
| Fe | 1.27-1.37 | 3.70-4.70 | 7.50-8.50 | 0.00 | ? | 4.60-5.40 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 5.60-6.50 | 2.80-3.30 | PM | SKH40 | JP | | HAP50*
| Fe | 1.54-1.64 | 3.70-4.70 | 7.50-8.50 | 0.00 | ? | 5.50-6.50 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 7.50-8.50 | 3.80-4.30 | PM | SKH40 | JP | | Hotvar*
| Fe | 0.55 | 2.60 | 0.00 | 0.00 | 0.75 | 2.25 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.85 | | | SW | | HS-23*
| Fe | 1.20 | 4.00 | 0.00 | 0.00 | ? | 4.90 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.20 | 2.90 | MM | T 11323(UNS) 1.3344(W Nr) | US | | HS-30*
| Fe | 1.30 | 4.20 | 8.50 | 0.00 | ? | 5.10 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 3.20 | MM | 1.3207 | US | | HS-60*
| Fe | 2.30 | 4.00 | 10.30 | 0.00 | ? | 6.90 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 6.40 | MM | 1.3241(W Nr) | US | | INFI
| Fe | 0.50 | 8.25 | 0.95 | 0.00 | ? | 1.30 | 0.11 | 0.00 | 0.74 | ? | ? | ? | 0.00 | 0.36 | | | US | | K190*
| Fe | 2.30 | 12.50 | 0.00 | 0.00 | 0.30 | 1.10 | 0.00 | 0.00 | 0.00 | ? | ? | 0.60 | 0.00 | 4.00 | | | SW | | K245*
| Fe | 0.61 | 0.55 | 0.00 | 0.00 | 1.17 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 1.06 | 0.00 | 0.00 | | 62SiMnCr4 | SW | | K306*
| Fe | 0.51 | 5.04 | 0.00 | 0.00 | 0.31 | 1.33 | 0.00 | 0.00 | 0.13 | ? | 0.014 | 0.95 | 0.04 | 1.34 | | X50CrMoV5 1 | SW | | K313*
| Fe | 0.62 | 5.30 | 0.00 | 0.00 | 0.40 | 1.20 | 0.00 | 0.00 | 0.00 | ? | ? | 1.10 | 0.00 | 0.30 | | | SW | | K340*
| Fe | 1.10 | 8.30 | 0.00 | 0.05 | 0.40 | 2.10 | 0.00 | ? | 0.19 | ? | ? | 0.90 | 0.00 | 0.50 | ESR | K340 ISODUR | SW | | K360*
| Fe | 1.25 | 8.75 | 0.00 | 0.00 | 0.35 | 2.70 | 0.00 | ? | 0.00 | ? | ? | 0.90 | 0.00 | 1.18 | ESR | K360 ISODUR | SW | | K390*
| Fe | 2.45 | 4.15 | 2.00 | 0.00 | ? | 3.75 | 0.00 | 0.00 | 0.00 | ? | ? | 0.55 | 1.00 | 9.00 | PM | | SW | | K700*
| Fe | 1.23 | 0.00 | 0.00 | 0.00 | 12.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.00 | | 1.3401, X120Mn12, Z120M12, GX120Mn12 | SW | | K890*
| Fe | 0.85 | 4.35 | 4.50 | 0.00 | ? | 2.80 | 0.00 | 0.00 | 0.00 | ? | ? | 0.55 | 2.55 | 2.10 | PM | | SW | | KAD181*
| Fe | 2.20 | 18.00 | 0.00 | 0.00 | ? | 2.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 1.00 | PM | KAD-181 | JP | | Kigami 2
| Fe | 1.10-1.20 | 0.00 | 0.00 | 0.00 | 0.20 | 0.00 | 0.00 | 0.00 | 0.00 | 0.03 | 0.006 | 0.10 | 0.00 | 0.00 | | Yellow 2 | JP | | Kigami 3
| Fe | 0.80 | 0.00 | 0.00 | 0.00 | 0.20 | 0.00 | 0.00 | 0.00 | 0.00 | 0.03 | 0.006 | 0.10 | 0.00 | 0.00 | | Yellow 3 | JP | | Koncor*
| Fe | 1.10 | 5.00 | 0.00 | 0.00 | ? | 1.10 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 3.00 | | | US | | L1
| Fe | 1.00 | 0.00 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 1.25 | 0.00 | 0.00 | | | US | | L2
| Fe | 0.50-1.00 | 0.00 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.20 | | | US | | L6*
| Fe | 0.70-0.90 | 0.03 | 0.00 | 0.00 | 0.35-0.55 | 0.00 | 0.00 | 0.00 | 1.40-2.60 | ? | ? | 0.25 | 0.00 | 0.15 | | L-6, CHAMPALOY | US | | L7
| Fe | 1.00 | 1.40 | 0.00 | 0.00 | 0.35 | 0.00 | 0.00 | 0.00 | 0.40 | ? | ? | ? | 0.00 | 0.00 | | L-7 | US | | LV-02*
| Fe | 0.68 | 13.00 | 0.00 | 0.00 | 0.60 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | LV-03*
| Fe | 0.95 | 13.50 | 0.00 | 0.00 | 0.65 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | LV-04*
| Fe | 0.90 | 18.00 | 0.00 | 0.00 | 0.70 | 1.15 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.10 | | | US | | M1*
| Fe | 0.83 | 3.75 | 0.00 | 0.00 | 0.30 | 8.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 1.70 | 1.15 | | REX TMO, Tatmo® | US | | M2*
| Fe | 1.00 | 4.15 | 0.00 | 0.00 | 0.30 | 5.00 | 0.00 | 0.00 | 0.00 | ? | 0.10 | 0.30 | 6.40 | 1.95 | | | US | | M2 EUR*
| Fe | 0.82-0.90 | 4.20 | 0.00 | 0.00 | 0.30 | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 6.40 | 1.80-1.90 | | M2, 1.3343, S6-5-2 | US | | M340*
| Fe | 0.54 | 17.30 | 0.00 | 0.00 | 0.40 | 1.10 | ? | 0.00 | 0.00 | ? | ? | 0.45 | 0.00 | 0.10 | ESR | M340DE Isoplast | SW | | M390*
| Fe | 1.90 | 20.00 | 0.00 | 0.00 | 0.30 | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.70 | 0.60 | 4.00 | PM | M390 Isomatrix | SW | | M42 *
| Fe | 1.05-1.10 | 3.75 | 8.00-8.25 | 0.00 | ? | 9.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35-0.60 | 1.50 | 1.15 | | 1.3247, BS4659, S7-4-2-5, A600, S2-10-1-8 | US | | M48*
| Fe | 1.50-1.55 | 3.75-4.00 | 8.50-9.00 | 0.00 | ? | 5.25 | 0.00 | 0.00 | 0.00 | ? | 0.07 | ? | 9.75-10.00 | 3.10 | CPM/MM | T 11348, CPM Rex 76 | US | | M62*
| Fe | 1.30 | 3.00-3.75 | 0.00 | 0.00 | 0.35-0.70 | 10.50 | 0.00 | 0.00 | 0.00 | ? | 0.06 | 0.25 | 6.25 | 2.00 | MM | T 11362(UNS), CPM Rex 20 | US | | M7*
| Fe | 1.00-1.02 | 3.75 | 0.00 | 0.00 | 0.25-0.30 | 8.50-8.75 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30-0.40 | 1.75 | 1.90-2.00 | | A600, Tatmo-VN®, Rex M7N | US | | Maxmet*
| Fe | 2.15 | 4.75 | 10.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 10.00 | 6.00 | MM | | US | | MBS-26
| Fe | 0.85-1.0 | 13.00-15.00 | 0.00 | 0.00 | 0.30-0.60 | 0.15-0.25 | 0.00 | 0.00 | 0.00 | 0.04 | 0.01 | 0.65 | 0.00 | 0.00 | | | JP | | MBS-30
| Fe | 1.12 | 14.00 | 0.00 | 0.00 | 0.50 | 0.60 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.20 | | | JP | | MKJ3*
| Fe | 0.90-1.30 | 0.90-1.70 | 0.00 | 0.00 | 0.90-1.60 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.025 | 0.40-1.20 | 0.00 | 0.00 | | | JP | | MPL-1*
| Fe | 3.75 | 24.00 | 0.00 | 0.00 | 0.50 | 3.00 | 0.00 | 0.00 | 0.00 | 0.015 | 0.015 | ? | 0.00 | 9.00 | CPM | CPM MPL-1 | US | | MRS-30
| Fe | 1.12 | 14.00 | 0.00 | 0.00 | 0.50 | 0.60 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.25 | | | JP | | MVS-8
| Fe | 0.80 | 14.00 | 0.00 | 0.00 | 0.50 | 2.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.20 | 0.00 | | | ? | | N690*
| Fe | 1.07 | 17.00-17.30 | 1.50 | 0.00 | 0.40 | 1.10 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.10 | | N690Co, 1.4528, X105CrC0Mo18-2 | DE | | Niolox*
| Fe | 0.80 | 12.70 | 0.00 | 0.00 | ? | 1.10 | 0.00 | 0.70 | 0.00 | ? | ? | ? | 0.00 | 1.10 | | SB1, 1.4153.03 | DE | | O1*
| Fe | 0.85-1.00 | 0.40-0.60 | 0.00 | 0.00 | 1.00-1.40 | 0.00 | 0.00 | 0.00 | 0.30 | ? | ? | 0.50 | 0.00 | 0.30 | | Ketos | US | | O2
| Fe | 0.90 | 0.00 | 0.00 | 0.00 | 1.60 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | US | | O6*
| Fe | 1.45 | 0.00-0.20 | 0.00 | 0.00 | 0.80-1.00 | 0.25 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90-1.20 | 0.00 | 0.00 | | Halgraph, Graph-Mo® | US | | O7
| Fe | 1.20 | 0.75 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.75 | 0.00 | | | US | | OCR8VMS*
| Fe | 0.80 | 8.40 | 0.24 | 0.00 | 0.26 | 1.55 | 0.00 | 0.00 | 0.19 | 0.018 | 0.004 | 0.52 | 0.00 | 2.60 | | | SI | | OH236Ni*
| Fe | 0.68 | 8.25 | 0.00 | 0.00 | 0.60 | 1.40 | 0.00 | 0.00 | 1.50 | ? | ? | 1.05 | 0.00 | 1.00 | | | SI | | OH260*
| Fe | 0.81 | 4.00 | 0.00 | 0.00 | 0.35 | 4.25 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 1.00 | | 1.2369, 81MoCrV42-16 | SI | | OHV6*
| Fe | 0.90 | 2.95 | 0.00 | 0.00 | 0.38 | 0.28 | 0.00 | 0.00 | 0.00 | ? | ? | 0.60 | 0.00 | 0.10 | | | SI | | OSIKRO5*
| Fe | 0.75 | 0.70 | 0.00 | 0.00 | 0.38 | 0.00-0.20 | 0.00 | 0.00 | 0.00 | ? | ? | 0.93 | 1.70 | 0.40 | | | SI | | PD #1*
| Fe | 1.10 | 7.75 | 0.00 | 0.00 | ? | 1.60 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.10 | 2.35 | MM | | US | | PGK*
| Fe | 1.40 | 8.50 | 0.00 | 0.00 | 0.40 | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90 | 1.50 | 1.95 | | | US | | PMC 27
| Fe | 0.60 | 13.50 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.00 | | | ? | | PMD M4*
| Fe | 1.35 | 4.20 | 0.00 | 0.00 | ? | 4.50 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 5.80 | 4.00 | PM | | DE | | PMD10*
| Fe | 2.45 | 5.25 | 0.00 | 0.00 | ? | 1.20 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.75 | PM | | DE | | PMD23*
| Fe | 1.30 | 4.20 | 0.00 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 3.10 | PM | PMD 23 | DE | | PMD30*
| Fe | 1.30 | 4.20 | 8.50 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 3.10 | PM | PMD 30 | DE | | PMD440*
| Fe | 2.20 | 17.50 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 5.80 | PM | | DE | | PMD60*
| Fe | 2.30 | 4.20 | 10.50 | 0.00 | ? | 7.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.50 | 6.50 | PM | PMD 60 | DE | | PMD9*
| Fe | 1.80 | 5.25 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 9.00 | PM | | DE | | R2*
| Fe | ? | 0.00 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | ? | 0.00 | PM | R-2 | JP | | RAVNE23*
| Fe | 1.25 | 4.15 | 1.00 | 0.00 | 0.50 | 5.00 | 0.00 | 0.00 | 0.50 | ? | ? | 0.70 | 6.30 | 2.95 | PM | S5-5-3, M3:2, 1.3344 | SI | | RAVNE30*
| Fe | 1.25 | 4.12 | 8.38 | 0.00 | 0.50 | 5.00 | 0.00 | 0.00 | 0.50 | ? | ? | 0.70 | 6.32 | 2.95 | PM | 1.3244, M3C1.2+Co | SI | | RN15X*
| Fe | 1.40 | 15.00 | 0.00 | 0.00 | ? | 2.00 | 0.00 | 4.50 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | DE | | Roltec*
| Fe | 1.40 | 4.60 | 0.00 | 0.00 | 0.60 | 3.20 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 3.70 | | | SW | | RS-30
| Fe | 1.12 | 14.00 | 0.00 | 0.00 | 0.50 | 0.55 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.25 | | RS30, RS 30 | US | | RWL-34
| Fe | 1.05 | 14.00 | 0.00 | 0.00 | 0.50 | 4.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.20 | | | SW | | S1*
| Fe | 0.50 | 2.50 | 0.00 | 0.00 | 1.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.80 | 0.00 | 0.20 | | BS4659 | US | | S390*
| Fe | 1.64 | 4.80 | 8.00 | 0.00 | 0.30 | 2.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.60 | 10.40 | 4.80 | PM | | SW | | S5*
| Fe | 0.60 | 0.25 | 0.00 | 0.00 | 0.85 | 0.30 | 0.00 | 0.00 | 0.00 | ? | ? | 1.90 | 0.00 | 0.20 | | Labelle Silicon #2 | US | | S590*
| Fe | 1.32 | 4.13 | 8.38 | 0.16 | 0.14 | 4.94 | 0.00 | 0.00 | 0.26 | 0.027 | 0.026 | 0.44 | 6.25 | 3.09 | PM | | SW | | S7*
| Fe | 0.55 | 3.25 | 0.00 | 0.00 | 0.70 | 1.40 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 0.25 | | 50CrMoV13-14, OH253, SR-77 | US | | S7 XL*
| Fe | 0.55 | 3.25 | 0.00 | 0.00 | 0.70 | 1.40 | 0.00 | 0.00 | 0.00 | ? | 0.005 | 0.35 | 0.00 | 0.25 | | Crucible S7 XL | US | | S790*
| Fe | 1.29 | 4.20 | 0.25 | 0.15 | 0.30 | 5.00 | 0.00 | 0.00 | 0.15 | 0.024 | 0.020 | 0.50 | 6.30 | 3.00 | PM | | SW | | SG1
| Fe | 1.40 | 15.00 | 0.00 | 0.00 | 0.40 | 2.80 | 0.00 | 0.00 | 0.00 | 0.03 | 0.03 | 0.50 | 0.00 | 2.00 | PM | | JP | | SG2*
| Fe | 1.25-1.45 | 14.00-16.00 | 0.00 | 0.00 | 0.40 | 2.30-3.30 | 0.00 | 0.00 | 0.00 | 0.03 | 0.03 | 0.50 | 0.00 | 1.80-2.20 | PM | SGPS | JP | | Shiro2*
| Fe | 0.95-1.00 | 0.20-0.50 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.70-1.30 | ? | ? | ? | 0.00 | 0.00 | | | JP | | Shirogami 1
| Fe | 1.30-1.40 | 0.00 | 0.00 | 0.00 | 0.02 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 0.00 | 0.00 | | White 1, White I, Shiro-ko 1 | JP | | Shirogami 2
| Fe | 1.10-1.20 | 0.00 | 0.00 | 0.00 | 0.02 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 0.00 | 0.00 | | White 2, White II, Shiro-ko 2 | JP | | Shirogami 3
| Fe | 0.80 | 0.00 | 0.00 | 0.00 | 0.02 | 0.00 | 0.00 | 0.00 | 0.00 | 0.025 | 0.004 | ? | 0.00 | 0.00 | | White 3, White III, Shiro-ko 3 | JP | | Silver Steel*
| Fe | 0.95-1.25 | 0.35-0.45 | 0.00 | 0.00 | 0.25-0.45 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00-0.045 | 0.00-0.045 | 0.00-0.40 | 0.00 | 0.00 | | | JP | | SK3*
| Fe | 1.05 | 0.30 | 0.00 | 0.25 | 0.50 | 0.00 | 0.00 | 0.00 | 0.25 | 0.03 | 0.03 | 0.35 | 0.00 | 0.00 | | SK-3 | JP | | SK4
| Fe | 0.90-1.00 | 0.00 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 0.00 | | SK-4 | JP | | SK5
| Fe | 0.80-0.90 | 0.00 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.35 | 0.00 | 0.00 | | SK-5 | JP | | Sleipner*
| Fe | 0.90 | 7.80 | 0.00 | 0.00 | 0.50 | 2.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90 | 0.00 | 0.50 | | | SW | | SRS-15
| Fe | 1.50 | 13.00 | 0.00 | 0.00 | ? | 2.75 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.25 | 1.50 | PM | | JP | | Stellite 6B
| Co | 1.10 | 30.00 | 0.00 | 0.00 | 1.00 | 1.50 | 0.00 | 0.00 | 3.00 | ? | ? | 2.00 | 4.50 | 0.00 | | | US | | Stellite 6K
| Co | 1.60 | 31.00 | 0.00 | 0.00 | 2.00 | 1.50 | 0.00 | 0.00 | 3.00 | ? | ? | 2.00 | 4.50 | 0.00 | | | US | | T15*
| Fe | 1.60 | 4.25 | 5.00 | 0.00 | 0.30 | 0.50 | 0.00 | 0.00 | 0.00 | ? | 0.070 | 0.35 | 12.25 | 5.00 | CPM/MM | Redwear 15, Micro-Melt® T15, CPM REX T15 | US | | T15 Plus*
| Fe | 1.60 | 4.80 | 8.00 | 0.00 | ? | 2.00 | 0.00 | 0.00 | 0.00 | ? | 0.030 | ? | 10.50 | 5.00 | MM | Micro-Melt ® T15 Plus | US | | T5MOV
| Fe | 0.50 | 14.00 | 0.00 | 0.00 | ? | 0.35 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.15 | | | ? | | Talonite 6BH
| Co | 0.90-1.40 | 28.00-32.00 | 0.00 | 0.00 | 2.00 | 1.50 | 0.00 | 0.00 | 3.00 | ? | ? | 2.00 | 4.50 | 0.00 | | | US | | Toughtec SF*
| Fe | 1.60 | 5.00 | 0.00 | 0.00 | 0.50 | 2.30 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 7.20 | SF | | SW | | UHB-15*
| Fe | 0.71 | 0.00 | 0.00 | 0.00 | 0.50 | 0.00 | 0.00 | 0.00 | 0.00 | 0.02 | 0.015 | 0.30 | 0.00 | 0.00 | | | SW | | UHC*
| Fe | 1.50-2.00 | 0.00 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | FI | | V-Gin1*
| Fe | 0.95-1.05 | 4.50-5.50 | 0.00 | 0.00 | ? | 0.80-1.20 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 0.00 | 0.20-0.50 | | | JP | | V-Toku1*
| Fe | 1.10-1.20 | 0.20-0.50 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 2.00-2.50 | 0.00-0.20 | | | JP | | V-Toku2*
| Fe | 1.00-1.10 | 0.20-0.50 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 1.00-1.50 | 0.00-0.20 | | | JP | | V1*
| Fe | 1.10-1.20 | 0.30-0.50 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 0.00 | 0.00 | | | JP | | V2*
| Fe | 0.95-1.05 | 0.30-0.50 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 0.00 | 0.00 | | | JP | | Vanadis 10*
| Fe | 2.90 | 8.00 | 0.00 | 0.00 | 0.50 | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 9.80 | PM | Vanadis-10 | SW | | Vanadis 23*
| Fe | 1.28 | 4.20 | 0.00 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 3.10 | PM | M3:2, M3-2 | SW | | Vanadis 30*
| Fe | 1.28 | 4.20 | 8.50 | 0.00 | ? | 5.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.40 | 3.10 | PM | | SW | | Vanadis 4*
| Fe | 1.50 | 8.00 | 0.00 | 0.00 | 0.40 | 1.5 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 4.00 | PM | | SW | | Vanadis 4E*
| Fe | 1.40 | 4.70 | 0.00 | 0.00 | 0.40 | 3.50 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 3.70 | PM | Vanadis 4 Extra Superclean3 | SW | | Vanadis 60*
| Fe | 2.30 | 4.20 | 10.50 | 0.00 | ? | 7.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 6.50 | 6.50 | PM | | SW | | Vanadis-6*
| Fe | 2.10 | 6.80 | 0.00 | 0.00 | 0.40 | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 5.40 | PM | | SW | | Vancron 40*
| Fe | 1.10 | 4.50 | 0.00 | 0.00 | 0.40 | 3.20 | 1.80 | 0.00 | 0.00 | ? | ? | 0.50 | 3.70 | 8.50 | PM | | SW | | Vascowear*
| Fe | 1.12 | 7.75 | 0.00 | 0.00 | 0.30 | 1.60 | 0.00 | 0.00 | 0.00 | ? | ? | 1.20 | 1.10 | 2.40 | | | US | | Vertex*
| Fe | 1.00 | 8.25 | 0.00 | 0.00 | 0.50 | 2.25 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.40 | | | US | | VG-1
| Fe | 0.95-1.05 | 13.00-15.00 | 0.00 | 0.00 | ? | 0.20-0.40 | 0.00 | 0.00 | 0.25 | ? | ? | ? | 0.00 | 0.00 | | VG1 | JP | | VG-10*
| Fe | 0.95-1.05 | 14.50-15.50 | 1.30-1.50 | 0.00 | 0.50 | 0.90-1.20 | 0.00 | 0.00 | 0.00 | 0.03 | ? | ? | 0.00 | 0.10-0.30 | | VG10, CMV60, CMV-60 | JP | | VG-10W
| Fe | 1.00 | 15.00 | 1.50 | 0.00 | ? | 1.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.40 | 0.20 | | | JP | | VG-2*
| Fe | 0.60-0.70 | 13.00-15.00 | 0.00 | 0.00-0.25 | ? | 0.10-0.20 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 0.00 | 0.00 | | VG2 | JP | | VG-5*
| Fe | 0.70-0.80 | 13.00-15.00 | 0.00 | 0.00-0.25 | ? | 0.20-0.40 | 0.00 | 0.00 | 0.00-0.25 | ? | ? | ? | 0.00 | 0.10-0.20 | | VG5 | JP | | Viking*
| Fe | 0.50 | 8.00 | 0.00 | 0.00 | 0.50 | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.50 | | | SW | | W1
| Fe | 0.70-1.50 | 0.15 | 0.00 | 0.00 | 0.10-0.40 | 0.10 | 0.00 | 0.00 | 0.20 | ? | ? | 0.10-0.40 | 0.50 | 0.10 | | W-1 | US | | W2
| Fe | 0.85-1.50 | 0.15 | 0.00 | 0.00 | 0.10-0.40 | 0.10 | 0.00 | 0.00 | 0.20 | ? | ? | 0.10-0.40 | 0.15 | 0.15-0.35 | | W-2 | US | | W4
| Fe | 1.10 | 0.00 | 0.25 | 0.00 | 0.30 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.50 | 0.00 | 0.00 | | W-4 | US | | W5
| Fe | 1.10 | 0.60 | 0.00 | 0.00 | 0.30 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.25 | 0.00 | 0.00 | | W-5 | US | | W7
| Fe | 1.00 | 0.00 | 0.50 | 0.00 | 0.30 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 0.30 | 0.00 | 0.20 | | W-7 | US | | W75*
| Fe | 0.70-0.80 | 0.00 | 0.00 | 0.00 | ? | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | | DE | | Weartec SF*
| Fe | 2.80 | 7.00 | 0.00 | 0.00 | 0.70 | 2.30 | 0.00 | 0.00 | 0.00 | ? | ? | 0.80 | 0.00 | 8.90 | SF | | SW | | WP7V*
| Fe | 0.50 | 7.80 | 0.00 | 0.00 | ? | 1.50 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 1.50 | | | DE | | WR70U*
| Fe | 0.70 | 8.50 | 0.00 | 0.00 | ? | 1.40 | 0.00 | 0.00 | 1.50 | ? | ? | ? | 0.00 | 1.00 | | | DE | | X-15
| Fe | 0.40 | 15.50 | 0.00 | 0.00 | ? | 2.00 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.30 | | | FR | | X-15TN*
| Fe | 0.42 | 15.55 | 0.00 | 0.00 | 0.46 | 1.70 | 0.21 | 0.00 | 0.20 | 0.02 | 0.002 | 0.23 | 0.00 | 0.29 | | | FR | | X105CrMo17
| Fe | 0.95-1.20 | 16.00-18.00 | 0.00 | 0.00 | 1.00 | 0.40-0.80 | 0.00 | 0.00 | 0.00 | 0.04 | 0.02 | 1.00 | 0.00 | 0.00 | | 1.4125, 440C | DE | | X110CrMoV15
| Fe | 1.10 | 15.00 | 0.00 | 0.00 | 1.00 | 0.50 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.12 | | 1.4111 | DE | | X30CrMoNi1-5-1
| Fe | 0.30 | 15.55 | 0.00 | 0.00 | ? | 0.98 | 0.42 | 0.00 | 0.14 | ? | ? | 0.51 | 0.00 | 0.00 | | Cronidur 30 | DE | | X40Cr13*
| Fe | 0.40 | 13.00 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.00 | | 420, 1.4034 | DE | | X45CrMoV15
| Fe | 0.42-0.55 | 13.80-15.00 | 0.00 | 0.00 | 1.00 | 0.45-0.60 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.10-0.15 | | 1.4116 | DE | | X45NiCrMo4*
| Fe | 0.45 | 1.40 | 0.00 | 0.00 | ? | 0.30 | 0.00 | 0.00 | 4.10 | ? | ? | ? | 0.00 | 0.00 | | 1.2767 | DE | | X46Cr13
| Fe | 0.42-0.50 | 12.50-14.50 | 0.00 | 0.00 | 1.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.045 | 0.03 | 1.00 | 0.00 | 0.00 | | 1.4034 | DE | | X50CrMoV15*
| Fe | 0.50 | 14.50 | 0.00 | 0.00 | 1.00 | 0.65 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.15 | | 1.4116, 440A, PK5 | DE | | X50CrMoW9-1-1*
| Fe | 0.50 | 8.50 | 0.00 | 0.00 | ? | 1.20 | 0.00 | 0.00 | 0.00 | ? | ? | 0.90 | 1.20 | 0.00 | | CRV2, 837, C4755, 1.2631, 19559 | DE | | X55CrMo14*
| Fe | 0.55 | 14.00 | 0.00 | 0.00 | 1.00 | 0.55 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 0.00 | 0.00 | | 1.4110, 440A | DE | | X55CrMoV15*
| Fe | 0.48-0.60 | 13.00-15.00 | 0.00 | 0.00 | 1.00 | 0.50-0.80 | 0.00 | 0.00 | 0.00 | 0.04 | 0.015 | 1.00 | 0.00 | 0.15 | | 1.4110 | DE | | X65CrMo14
| Fe | 0.55-0.60 | 13.00-15.00 | 0.00 | 0.00 | 1.00 | 0.50-0.65 | 0.00 | 0.00 | 0.00 | ? | ? | 1.00 | 0.00 | 0.00 | | 1.4109 | DE | | X90CrMoV18*
| Fe | 0.85-0.95 | 17.00-19.00 | 0.00 | 0.12 | 0.39-1.00 | 0.90-1.30 | 0.00 | 0.00 | 0.30 | 0.026-0.040 | 0.004-0.020 | 0.40-1.00 | 0.14 | 0.07-0.12 | | 1.4112, CSN 17042, 440B, OCR6 | DE | | Y11Cr17
| Fe | 0.95-1.20 | 16.00-18.00 | 0.00 | 0.00 | 1.25 | 0.00 | 0.00 | 0.00 | 0.00 | 0.035 | 0.015 | 1.00 | 0.00 | 0.00 | | | CN | | Z60CDV14
| Fe | 0.60 | 14.00 | 0.00 | 0.00 | 0.20 | 0.60 | 0.00 | 0.00 | 0.00 | ? | ? | 0.40 | 0.00 | 0.50 | | | JP | | ZDP-189*
| Fe | 3.00 | 20.00 | 0.00 | 0.00 | ? | 1.30 | 0.00 | 0.00 | 0.00 | ? | ? | ? | 1.50 | 0.10 | PM | MC66 | JP |
Served 8300 queries. A good chrome-vanadium steel, similar to O1 steel, less expensive. Blackjack knives used it, and rumors are Carbon V was that steels in one of its previous incarnations. Found it on German knives forums. Can't fins any other info on the net, Partly due to its name.1.2008 returns boatload of documents published on 1st of any month of the year 2008... Looks like quite pure, high carbon steel. High speed tool steel with extremely high Tungsten(W) content. I have no idea why this is so popular in Europe. I've counted almost 2 dozen manufacturers for it, including Bohler Uddeholn(S200), Thyssen-Krupp(3355), and bunch of others. I guess it's pretty much a shame if you are a euro steel maker and don't make it :) Simple carbon steel. Relatively simple carbon steel. Can produce pretty decent results when heat treated properly, Several knife manufacturers use it in their budget knives. DNH7 and XC75 are European designations for it. Simple Carbon Steel. Simple yet very efficient blade steel. Very popular with knifemakers. Sort of de-facto default carbon steel. Rusts easy though. Mostly you'll encounter it in 58-60HRC range. Several makers take it all thee way up to 64-65HRC. Sandvik makes very pure equivalent of this steel under Sandvik 20C Shock Absorber name. Sandvik medium Carbon stainless steel. Sandvik steel, very pure alloy. Sandvik steel, very pure alloy. Sandvik steel, very similar to Uddeholm AEB-L steel. In fact variation in composition is of 0.1% magnitude. Same elements. Very clean alloy. Sandvik steel. Exclusive to Kershaw/Kai cutlery. Composition is not published. Addition of the nitrogen should improve corrosion resistance and hardness. US version of Japanese ATS-34 steel. used to be considered #1 stainless steel for cutlery. Still one of the premium steels. Uddeholm bandsaw steel. Sandvik steel, very pure alloy. Popular with Japanese knifemakers, referred simply as Swedish steel. Often seen in Japanese kitchen knives, where it is hardened in the range of 62-64HRC. Daido steel, very similar steel to 6A, VG2 or 12C27 steel. Can reach HRC 57-59 with it. Decent steel with proper heat treatment. Highly stain resistant mild steel. Shouldn't really ever be used in knives, but unfortunately some cheap knife manufacturers do use it. It's a really mild alloy, not really a carbon steel with just 0.03% C in it. Avoid. Daido steel. In their internal classification it's called S-STAR, in DIN classification - 1.4034, X40Cr13, AISI - 420Mod. From what I have seen it's used mainly in low end, budget knives. Doesn't really qualify as high carbon which means 0.5%C or more. Thyssen-Krupp medium carbon steel. Officially used in hygienic products. Also used in low end factory knives. Cold steel uses it lately. Similar to AISI 420 steel, but as CS claims exhibits better wear resistance. Low alloy steel, noticeable for toughness, good torsional strength and good fatigue strength. Not so hot for knife blades. Should be used as cladding for san-mai type knives, but this and worse steels are used in low end stainless knives. Carpenter Technologies proprietary cold work, semi-stainless tool steel. Latrobe specialty steel. Fairly good performance at a cheap price. Buck knives uses it intensively. Crucible version is CSM® 420 XL. Latrobe trademark, ball bearing steel. Very clean alloy, with very low contaminant content. Very small carbide size. Maximum working hardness - 60HRC. German version of S7 steel, ASIS name for this is S7, but specs are slightly different. Knife Steel FAQ - A steel popular with forgers, it is popular now for a variety of knife styles, but usually bigger blades that need more toughness. It is essentially a simple
spring steel with chromium added for hardenability. It has good wear resistance, but is known especially for its outstanding toughness. This steel performs well over a wide range
of hardnesses, showing great toughness when hardened in the low 50s Rc for swords, and hardened up near the 60s for knives needing more edge holding.
Knife Steel FAQ - Formerly a ball-bearing steel, and as such previously only used by forgers, it's available in bar stock now. It is similar to 5160 (though it has around 1% carbon vs. 5160 ~.60%),
but holds an edge better. It is less tough than 5160. It is used often for hunting knives and other knives where the user is willing to trade off a little of 5160's toughness for
better wear resistance. However, with the continued improvement of 52100 heat treat, this steel is starting to show up in larger knives and showing excellent toughness. A modified
52100 under the SR-101 name is being used by Jerry Busse in his Swamp Rat knives. German equivalent 1.3505 is discontinued.
The 86xx series low alloy steels were developed during WWII to conserve nickel and other alloying elements. Greco knives uses them. Low alloy, low carbon steel. Sometimes AUS8 is referred as 8A, which is incorrect, as you can see 8A is absolutely different alloy. Cold work die steel. Extremely high wear resistant tool steel. Made by several companies. I guess the most popular in knife world is Crucible CPM 10V made by their CPM technology. Alos made by Latrobe under Duratech A11 name using PM technology and Carpenter Technologies under its AISI name A11, using their MicroMelt® technology.
Carpenter Technologies proprietary, cold work tool steel.Similar to AISI A11 tool steel, except for the less carbon. Knife Steel FAQ - An excellent air-hardening tool steel, it is tougher than D2 and M2, with less wear resistance . As an air-hardening steel, don't expect it to be differentially tempered. Its good toughness makes it a frequent choice for combat knives.
Designed to improve cutting performance of 440C class steel. As far as I understand main difference is the presence of large primary carbides. That is quite different approach from other makers trying to downsize the carbide size. High carbon version of AEB-L steel. As far as I understand Lone Wolf proprietary steel. Udderholm Steel, similar to Sandvik 13C26. Very pure steel. Phil Wilson used to work with it. Good results around 60HRC. Low carbon, stainless steel. used in cheap stainless knives. Bohler-Uddeholm low alloy, cold work tool steel. As their site says it's the same AISI O1 steel, but specs don't really match, hence different record. Aichi steel. Low end stainless steel. Cheaper stainless steel, similar to AISI 440A used by cheap stainless steel knife manufacturers. Aichi stainless steel. Aichi steel. Sometimes referred as A8, which isn't correct. More often it's called 8A, which is a common abbreviation. Similar to 440B steel. AUS8A is the same steel, except it's annealed. Apparently A stands for Annealed. Knife Steel FAQ - BG-42 is somewhat similar to ATS-34, with two major differences: It has
twice as much manganese as ATS-34, and has 1.2% vanadium (ATS-34 has no
vanadium), so look for significantly better edge-holding than ATS-34.
The addition of vanadium and the clean manufacturing process (VIM/VAR)
also gives BG-42 better toughness than ATS-34. Chris Reeve switched
from ATS-34 to BG-42 in his Sebenzas, but has now moved to S30V. Older German tool steel. Good wear resistance and impact toughness. High purity steel. Uddeholm tool steel. Bohler-Uddeholm chromium-molybdenum-vanadium alloyed steel. High toughness, with good wear resistance. Cold Steel name for the Camillus steel which was used in CS carbon steel series
knives like Cold Steel SRK and Recon
Tanto. Camillus made the steel for CS and also used in their own knives
under 0170-6C name. Typical hardness, at least for Camillus blades was
58-59HRC. Composition was kept secret. Wayne Goddard analyzed Carbon V and
published in his book - The Wonder Of Knife Making. That's the composition shown in here. Similar to O1 and 1095 Cro-Van. USA Bethlehem Steel Corporation knife steel. Kitchen Knife Steel FAQ - Latest super duper PM steel. Ultra high carbon and chromium content. C - 3% and Cr - 20%. Very high hardness, several makers harden it to 65 or even 67HRC. As you can guess very expensive too. ZDP-189 and MC-66 are very similar, in that those two have the same C and CR content. Exact element makeup unknown. Overall, very good edge holding and toughness. Hard to sharpen compared to other steels, nothing impossible though. So far Hattori is the only one making kitchen knives out of it. Cheaper and less alloyed version of the Cowry-X. Crucible metallurgy tool steel. Very high wear resistance. Crucible metallurgy tool steel. High toughness and wear resistance. Knife Steel FAQ - CPM's incredibly tough 3V gives excellent wear resistance and good stain resistance as well, although when it does stain, it is said to pit rather than surface rust. When maximum
toughness is desired, with very good wear resistance, 3V is a great choice.
CPM REX M35HCHS is a 5% cobalt modification of M2 high speed steel used almost exclusively for hobs and other gear cutting tools where higher red hardness is required. Crucible High Carbon(HC) modification of M4 steel. CPM REX 121 is a high vanadium cobalt bearing tool steel designed to offer a combination of the highest wear resistance, attainable hardness, and red hardness available in a high speed steel. Crusible Cobalt free high speed tool steel for the applications where the presence of the Cobalt is not desired. Crucible high speed steel, with high red hardness. Crucible high speed tool steel, high red hardness. Basically it is AISI M4 steel modification with Cobalt. Crucible also makes high sulfur version of this steel, Rex 54HS, obviously less suitable for knives. Relatively new steel from Crucible. Very high wear resistance. Important poart is the addition of Niobium which forms very hard carbides. They're harder than Vanadium carbides and form in substantial amounts even at lower hardness. Can get up to 64HRC. Now discontinued. Extremely high wear resistance. Originally developed for dentist industry, it was too difficult to machine and was eventually dropped. Edge holding and corrosion resistance are very high. I don't know if anyone besides Phil Wilson ever made a knife out of this alloy. Developed circa 2003, by Crucible. Rare case of a steel designed as a cutlery steel. Several well known knife makers participated in the development/research including: Phil Wilson, Sal Glesser, Ernest Emerson, Tony Marfione, William Harsey Jr., Tom Mayo, Jerry Hossom, and Paul Bos, Chris Reeve. The result is a very good steel, although heat treating it properly was a problem initially. It isnt' A2 class toughness as Knife Steel FAQ states, but still, quite tough and wear resistant for the stainless steel. Considered as one of the premium mainstream cutlery steels.
Crucible CPM steel. As I understand it is an evolution of CPM S30V steel. Has Niobium and Nitrogen in it, unlike S30V. So far I haven't seen it listed on Crucible website, nor have I seen a knife made out of it, but looks very promising. Crucible metallurgy CPM version of the famous 154CM steel. Contains small amount of Vanadium, increasing wear resistance, but not listed in official specs. Dorrenberg-Edelstahl cold work tool steel with good toughness. Yoshikin proprietary stainless steel for their brand Global knives. Cr
indicates Chrome in the alloy, Mo is for Molybdenum and Va is for Vanadium. Exact chemical composition is unknown, except for 18% of Chromium in it, or 18 is the combined percentage of alloying elements in it, which is most likely what 18 stands for in the name of the steel. Highly stain resistant with pretty good edge holding
ability. Crucible Metallurgy steel, specifically developed for the knifemakers who forge their steel. Heat treatment and forging should be similar to those of W1 and O1 steels. Cold work tool steel. Metal Ravne makes it under CRV1 name. According to them very high durability and cutting performance of tough items. No known knives from this steel so far. Metal Ravne cold work tool steel. Mn-Cr cold rolled spring steel.
Si-Cr heat treatable spring steel. Used for strained springs for cars and railway carriages and for surfaces requiring abrasion resistance. High strength, hardness and wear abrasion resistance. Low machinability, workability and weldability. Chromium stainless steel. Good workability when hot. Used for applications requiring hardness and corrosion and wear resistance. (Corrosion resistance reduced when not heat treated, heat treated and polished resists rust, diluted nitric acid and mild organic acids). Bad weldability. Similar to 420 (AISI) steels. X90CrMoV18 steel manufacturer lists it as the equivalent of CSN 17042 steel, except the specs are different, while CSN specs do not list X90CrMoV18 as DIN name. Similar to the 19802 steel, less alloyed, Like 19802 working hardness is over 62HRC. High speed tool steel with good toughness. For applications requiring machining materials up to tensile strength of 900 N/mm2 (milling cutters, knives, saw blades, drills, taps, reamers, etc.) Suitable for coating (e.g. titanium nitride). According to the spces attainable working hardness is 62HRC or more.
D2 is sometimes called a "semi-stainless". It has a fairly high chrome content (12%), but not high enough to classify it as stainless. It is more stain resistant than the plain carbon
steels. It has good wear resistance. D2 is much tougher than the premium stainless steels like ATS-34, but not as tough as many of the other
non-stainless steels mentioned here. The combination of great wear resistance, almost-stainlessness, and good toughness make it a great choice for a number of knife styles. Bob
Dozier is one maker who uses D2. Benchmade is using D2 in its knives, both fixed and folders. Japanese equivalent SKD-11 is used by Yoshikane in their kitchen knives.
Oil hardening, very high wear resistance tool steel. Tool steel. D5 tool steel is an air hardening, high-carbon, high-chromium, tool steel. Unlike other steels from D* series, D7 has cobalt addition, which provides resistance to galling and pick-up. Not clear how does this help with knife blades. Air hardening alloy tool steel with excellent resistance to wear and abrasion. Excellent tool steel, used for making dies, molds, tools, rolls, and knives. International Mould Steel product. Cold work die and mould steel. Latrobe version of M2 steel. Slightly lower C content and a different name. At least they list it as ASTM M2. Latrobe highly wear resistant, PM tool steel. Good corrosion resistance due to very high Chromium content. Latrobe PM tool and die, air hardening steel. Large volume of Vanadium carbides ensures very good wear resistance. Also characterized with good impact resistance. Attainable hardness 63HRC. Latrobe PM cold work tool steel. Similar to CPM M4 steel, but should be tougher. Very clean alloy. Latrobe PM air hardening tool steel. High impact toughness and good wear resistance. Latrobe PM steel. Medium Carbon tool steel with high impact toughness and good wear resistance. Fine grain size, small carbides and in general, very clean alloy. Udeholm steel. In their color coding this is blue/black code steel. Meaning, Cold Work/High Performance steel. As far as the knives are concerned, interesting properties are high wear resistance coupled with high corrosion resistance. Often referred as UHB Elmax, although I am not certain where does that come from, definitely not from Uddeholm. UHB might be UddeholmBohler abbreviation, just a guess. Hitachi YSS cutting tool Steel. Recommended hardness 56-58HRC. Hitachi YSS cutting tool Steel. Recommended hardness 59-61HRC. Hitachi YSS cutting tool Steel. Recommended hardness 56-58HRC. Basically this is a real stainless steel, practically doesn't rust. Hitachi PM high speed tool steel. Hitachi PM high speed tool steel. Bohler-Uddeholm high performance molybdenum vanadium alloyed hot-work tool steel. Reaches 62-64HRC. Cerpenter Technologies high sped tool steel. Uses their trademark Micro-Melt® technology. Carpenter Technologies high speed tool steel. Uses Micro-Melt® technology. Cerpenter Technologies high sped tool steel. Uses their trademark Micro-Melt® technology. Bohler-Uddeholm cold work tool steel, uses their proprietary Microclean technology. Apparently very clean alloy :) Bohler-Uddeholm steel. Bohler-Uddeholm Cold work tool steel. Bohler-Uddeholm cold work tool steel. Bohler-Uddeholm cold work steel. Also contains Al. Bohler-Uddeholm steel. Also contains Al. Bohler-Uddeholm PM cold work tool steel. High wear resistance and good toughness. Bohler-Uddeholm steel. Very high Mn content. Optimized for high toughness and applications where impact and pressure resistance is critical. Very unlikely to be used in knives, but several sources list it in knife steels. never heard of any knife made out of it. The alternate names for this steel are nearest approximations of standards. Bohler-Uddeholm PM cold work tool steel. Uses their proprietary Microclean technology. Tool steel, used for cutting metals and other cutting instruments. Latrobe hot work, air hardening tool steel. At the same hardness Koncor exhibits same wear resistance properties as M2 and D2, however impact toughness is higher. Knife Steel FAQ - A band saw steel that is very tough and holds an edge well, but rusts easily. It is, like O1, a forgiving steel for the forger. If you're willing to put up with the maintenance,
this may be one of the very best steels available for cutlery, especially where toughness is desired. In a poll on the knifemakers email list back in the 1990s, when asked what the
makers would use for their personal knife, L-6 emerged as the top choice. Crucible makes it under Champaloy name.
Lone Wolf Knives proprietary steel. named in honor of the famous knifemaker Bob Lovless. As I understand he did participate in development of the formula. Lone Wolf Knives proprietary steel. named in honor of the famous knifemaker Bob Lovless. As I understand he did participate in development of the formula. Lone Wolf Knives proprietary steel. named in honor of the famous knifemaker Bob Lovless. As I understand he did participate in development of the formula. As per Crucible - molybdenum-tungsten high speed steel is a tough general purpose high speed steel with high cutting efficiency and excellent finishing properties. It is adapted to fast light cuts on soft or medium hard materials. Latrobe calls their version Tatmo®. Very popular high-speed steel, it can hold its temper even at very high temperatures, and as such is used in industry for high-heat cutting jobs. Not quite knife works, but M2 does have better wear resistance and toughness at the same hardness compared to such a popular knife steel as D2. Makes better blade steel, unless stain resistance is an issue.
Benchmade used to make M2 knives, including AFCK, 710 and Nimravus. Note - Si, S and Mn are taken from Crucible specs. Other makers may have different amount. See versions from Latrobe in this database.
Latrobe's yet another modification of M2 steel. As the spec states, this version is melted at higher temperature and higher C, 0.05 more than Double Six from Latrobe, gives slightly higher attainable hardness, while sacrificing a little toughness. Bohler-Uddeholm tool steel. Good machineability and wear resistance. Working hardness around 58HRC. Workable, but not very good for knife blades. Bohler-Uddeholm martensitic Chromium steel with very high wear and corrosion resistance. Cobalt high speed steel which achieves a high hardness with excellent cutting performance and good toughness. M42 has excellent wear resistance, achieving 68-70 Rockwell hardness. Several companies make M42 steel. Carpenter makes it using PM technology. Super high speed tool steel. Attainable hardness 68-70HRC. Made by several companies. Crucible and Carpenter make it using their respective trademark technologies CPM and MicroMelt.
Crucible also makes higher sulfur version(up to 0.22%) of this steel, Rex 76(HS), which while easier to machine, is less suitable for knives compared to Rex 76. AISI M62 High speed tool steel is made by several companies. Cerpenter Technologies makes it using their trademark Micro-Melt® technology. Crucible makes CPM version of this alloy, named CPM REX 20, and high Sulfur version Rex 20HS, which has up to 0.22% S, less suitable for the knives. High speed tool steel. Working hardness for industrial applications 66HRC. Latrobe version(Tatmo-VN), contains some Nitrogen. Crucible version (Rex® M7N) also has unspecified amount of Nitrogen and slightly higher content of V and Mo. Balanced toughness and wear resistance, optimized for cutting tools. At 66HRC it should be slightly more wear resistant and less tough than AISI M2 tool steel. Cerpenter Technologies high sped tool steel. Uses their trademark Micro-Melt® technology. MKJ3 is a high carbon chromium bearing steel, with special heat treating process. It has a higher hardness and a more stable structure than standard chrome bearing steel. Crucible stainless tool steel. Bohler steel, recommended working hardness 58-60HRC. Similar to 440C. Niobium steel very used by French and Belgian knifemakers supposed to have a very fine grain and D2 like wear resistance.
Knife Steel FAQ - This is a steel very popular with forgers, as it has the reputation for being "forgiving". It is an excellent steel, that takes and holds an edge superbly, and is tough (although
not as tough as, say, 5160). It rusts easily, however. Randall Knives uses O1, so does Mad Dog Knives.
Crucible and Latrobe both make their version of AISI O6. Respectively named Halgraph® and Graph-Mo® Metal Ravne Cold work tool steel. Cold Work tool steel, good wear resistance, medium toughness. Metal Ravne cold work tool steel with high hardness and wear resistance. Metal Ravne low alloyed cold working tool steel. Cold work tool steel with good wear resistance. Carpenter Technologies proprietary cold work tool steel. Latrobe air hardening, cold work knife and die steel. At 60HRC is should have similar wear resistance with D2, being much tougher. Go figure, why D2 is popular and this one isn't. Dorrenberg-Edelstahl PM high speed steel. Attainable working hardness up to 65HRC. Dorrenberg-Edelstahl PM cold work tool steel. Fine carbide distribution, increased wear resistance compared to PMD9. Dorrenberg-Edelstahl PM high speed steel. Identical to PMD30 steel, except it has no cobalt in it. Dorrenberg-Edelstahl PM high speed steel. Identical to PMD23 steel, except the addition of 8.5% Cobalt. Dorrenberg-Edelstahl PM martensitic stainless steel. High carbide volume with fine carbides. High wear resistance. Dorrenberg-Edelstahl PM high speed, very high alloy steel. Dorrenberg-Edelstahl powder metallurgy cold work tool steel. Very fine grain, high wear resistance. Kobelco Steel. Powder metallurgy, high speed tool steel. So far I know two Japanese knifemakers using it in their knives, Tanaka and Itou. Metal Ravne PM high speed tool steel. Metal Ravne PM high speed tool steel. Dorrenberg-Edelstahl martensitic stainless steel. Used in food industry and other tooling. Therefore, no reason not to be used kn knives. Should be able to achieve 61-62HRC according to makers charts. High wear resistance thanks to Niobium carbides. Very high Nb content. The only steel having more Nb is CPM S35VN steel, 5%. Bohler-Uddeholm cold work tool steel offering a combination of high wear resistance, good resistance to cracking, and high compressive strength. For knives can be hardened to 62-64HRC. Heavy duty, highly shock resistant steel. Bohler-Uddeholm PM steel. High speed, red hot hardness tool steel. God toughness and wear resistance. Crucible steel. What's interesting about it is very high hardness for shock resistant steel. Haven't seen this one in the knife, but looks like it can go all the way up to 62HRC and keep its toughness. Bohler-Uddeholm PM steel. Uses their proprietary Microclean technology. Highly shock resistant tool steel. Busse SR-77 is based on this steel. Crucible makes their own clean version of this steel, called S7 XL steel or S7 Premium. Crucible modification of S7 steel. Also called S7 premium. basically, it is a super clean S7, double refined, etc. Very low Sulfur content. I figure it will make better knife steel than S7. Bohler-Uddeholm PM high speed tool steel. Uses their proprietary Microclean technology. Takefu steel. Used by Shun, Fallkniven and a few other makers. Takefu steel. As they say, their most popular cutting steel. This is not Shirogami 2 steel, even though sometimes Shirogami 2 is referred as Shiro2. Whenever you see the abbreviation, it is most likely referring to Hitachi Shirogami 2 steel, not Takefu Shiro2. Japanese carbon steel used in razors and less expensive kitchen knives. Carbon steel. Used in Tsukiji Masamoto carbon steel knives. Uddeholm Cold work tool steel. Good wear and chipping resistance. Attainable hardness over 60HRC. High speed tool steel, specifically designed for high wear resistance and strength. Very high Tungsten(W) content. High Vanadium content. Made by several companies. Including: Carpenter and Crucible. Strangely, Carpenter lists it as Micro-Melt® 15, T-15 is AISI name, although some sources list it as Redwear 15, which isn't correct. Crucible lists it as Cpm® Rex® T15. Carpenter Technology Corporation high speed tool steel. Improved hardness capability and wear resistance compared to M series steels. Bohler-Uddeholm spray formed tool steel. Characterized with very high wear resistance and good toughness. According to Uddeholm datasheets, its relative wear resistance at 58HRC
is 4.5 as great than that of the AISI D2 tool steel at the same hardness. Toughness is slightly better than D2 and, but ductility(resistance to chipping) is ~4 times as high.
Uddeholm bandsaw steel. Proprietary knife steel developed and used by knifemaker from Finland, Roselli. UHC stands for Ultra high carbon. Although, variation is quite large in the published spec, if you call that a spec. It's just Carbon content. Reportedly, the steel can attain 64-66HRC and holds the edge very well at that hardness. Takefu steel, from Swedish iron ore. Very pure steel. Takefu steel made out of Swedish iron ore. Takefu steel made out of Swedish iron ore. Takefu steel. Takefu steel. Bohler-Uddeholm product. Very high alloy, high speed tool steel. Capable of hrc 65. Bohler-Uddeholm product. Full name - Vanadis 23 Super clean, high speed PM tool steel. Can reach HRC 66. Bohler-Uddeholm steel. Another one from Super Clean series. High speed, PM tool steel. Bohler-Uddeholm steel. High wear and chipping resistance. Recommended hardness - 60HRC. Bohler-Uddeholm PM steel. High wear and chipping resistance, very good ductility. Bohler-Uddeholm product. Extremely high alloy, high speed tool steel. Capable of very high red hot hardness. Can be hardened to 68HRC. Bohler-Uddeholm PM cold work tool steel. Using their Super Clean technology. Bohler-Uddeholm cold work tool steel. interesting part is 1.8% N in it. Knife Steel FAQ - A very hard-to-find steel, with a high vanadium content. It is extremely difficult to work and very wear-resistant. It is out of production.
Air Hardening tool steel. High-end stainless steel. Due to the vanadium content, VG-10 takes a very good edge and holds it well. Very popular with Japanese kitchen knife makers and with knife makers in general. Typically it is around 60-61 HRC, although some makers take it to 62HRC. Miyabi sells knives with CMV60 steel, which are VG-10, where CMV is Cobalt/Molybdenium/Vanadium. Takefu cutlery steel. Takefu cutlery steel. Bohler-Uddeholm, high shock resistance, oil-air-vacuum-hardening steel. Developed to replace S7 steel and similar alloys where besides high shock resistance, improved wear resistance is required. Krupp steel, used by Finnish knifemaker Roselli, in his standard line knives. As the references state it is unalloyed steel. Implying that there are no other alloying elements in W75. On the other hand, trace amounts of contaminants e.g. S and P will be there and most likely some Mn and Si as well. Bohler-Uddeholm WEARTEC SF steel is a very highly alloyed spray formed cold work tool steel with a combination of extremely high wear resistance and a good resistance to cracking. It is suitable for rolls and rotary knives with very high demands on abrasive wear resistance and carbide applications requiring toughness. As per Uddeholm data at 60 HRC Weartec SF relative wear resistance is almost 6 times higher than that of the AISI D2 tool steel at the same hardness. Resistance to chipping(Ductility) is around twice as better compared to D2 and toughness is slightly better than D2. Dorrenberg-Edelstahl cold work tool steel with good very high toughness and good compressive strength. Dorrenberg-Edelstahl steel. This French steel was developed for the aircraft industry for jet ball bearings, as well as the medical industry for scalpels. It has the ability to resist rust in the worst of conditions while maintaining ample edge retention. German steel, low carbon stainless. According to the manufacturer equivalent of AISI 420 steel, but it's not really the same, quite different Mn, no Mo, etc... This is a higher carbon version of the standard 4¼% nickel air/oil hardening steel. Nothing really exciting for the knives. German steel, one of the most popular kitchen knife steels in mainstream German knives. Manufacturer lists it as AISI 440A, but specs are considerably different, especially the Chromium content. High shock and impact resistant steel. Another confusing steel. Manufacturer lists as AISI 440A and DIN 1.4110, in reality specs don't match neither. Look up those two separately in the database. Ref - Kitchen knife Steel FAQ. German steel, used by Messermeister in their kitchen knives. Slightly better wear resistance compared to another popular kitchen knife steel X50CroMoV15M. This should be the same steel as CSN 17042, except specs are different, again...
You can look up CSN 17042 record as well. Kitchen Knife Steel FAQ - Latest super duper PM steel. extremely high carbon and chromium content. C - 3% and Cr - 20%. Very high hardness, several makers harden it to 65 or even 67HRC. As you can guess very expensive too. Cowry-X and MC-66 are very similar, in that those two have the same C and CR content. Although, Henckel representative in Tokyo did confirm MC66 being ZDP-189. Exact element makeup unknown, whatever I have in the Knife Steel Chart is not confirmed by Hitachi. Unlike Cowry-X, ZDP-189 contains Molybdenum, Tungsten and Vanadium. Overall, very good edge holding and toughness. Hard to sharpen compared to other steels, nothing impossible, really.
 Quick Help
General use:
Table Columns - Name indicates the steel name;
# - Check the box in this column to include the alloy in the Analysis Graph. Click on the Graph button to build the graph for the selected alloys.
Base - Alloy base element. For all steels that would be Iron (Fe), Cobalt based alloys that's Co.
A.k.a - Also Known As, alternate names for the given alloy.
Tech - Technology used in making the alloy, for conventional alloys the column is empty, CPM stands
for Crucible Particle Metallurgy and PM stands for Powder Metallyrgy.
Origin - Country where the steel is produced/invented. Currently I'm using two letter coutry codes.
Graph Builder - Graph builder can build the graph for up to 7 alloys simultaneously to compare their chemical composition. Select the desired alloys inthe table by
checking the box in the # column and click the Graph button. More details about the graph behavior in the Graph builder help.
? - Question marks indicate unknown data. For the elements, ? indicates that it is known to be present in the alloy, however, exact amount is unknown.
Sorting - Click on any column name or little red sort direction indicator. If this is not the column by which the previous sort was performed then the sort is done in
ascending direction. If this column is already sorting the table, then sorting is performed in the opposite direction from the current sort direction. You can also specify sort
column and direction from the Filters form.
Notes - Steel names with * have comments attached. Move mouse over the cell containing it and sticky note widow will pop up. To close the sticky, click mouse outside of
the sticky window, or click the sticky close button, or hit the Esc key.
Filtering - Click the Filters button to display record filter dialog.
Hint - To bookmark this page with preferred query - Each column has an embedded link with all the selected query parameters encoded, plus sorting by that column. You can
either drag and drop necessary column name from the page to bookmark bar, or click on that column and then bookmark the page. For http savvy ppl, form is using POST method, but
the page itself handles both, GET and POST parameters. Table column headers are the links with appropriate query params.
Filters Form
To display filter dialog click the Filters button. To hide it without issuing a query, click the Filters button again. To submit a query click
the Apply Filters button. To reset all of the controls in the Filters form, click the Clear All button. This removes all of the filter conditions and the
full table will be returned.
Using Filters Form
Use Filters form to display only specific alloys of interest. Alloys can be filtered out based on data in the table.
General rules: Form control names match table field names. Separate filter conditions are combined with AND clause. Which means, the steel must satisfy ALL of the
conditions in order to be displayed. However, individual condition statements are combined with OR clause. Therefore, all of the steels satisfying any of the statement in the
condition input will be displayed. E.g. if the Name or A.k.a. box has value 10*,CPM* all of the alloys having names or one of the alternate names(A.k.a) starting
with either 10 or CPM keywords will be displayed. E.g. Typing keyword white* will display Shirogami steels, even thought heir name column content is Shirogami, A.k.a.
contains alternate names for that steel, one of the values is White Steel. White* matches White Steel in A.k.a column.
If at the same time Origin field is set to US, nothing will be displayed, as there are no US made steels what have White in the name or alternate names(a.k.a. column).
In this case we had two conditions, that either name or a.k.a. contained keyword white AND it's origin was set to US. The last condition wasn't satisfied so we got zero records.
Query Texts - There are 2 text query fields in the Filters form. Each of them can have multiple keywords or patterns separated by , (comma). Those patterns will be
combined by OR condition. So, query with Name or A.k.a. field set to R2,1095 will display just those 2 steels. For more flexible queries special symbols should be
used. See below. Exactly same rules apply to Notes Contain field.
Patterns - Pattern is defined as a sequence of alphanumeric characters and special symbols. Text search fields can contain one or more pattern separated by ,
character. Valid charcters for the pattern are from a-z(lowercase a to z), A-Z(uppercase A to Z), and numbers.
A pattern without *, i.e. just alphanumeric characters and numbers means exact match, e.g. A2 will match only steel with name A2.
There are two symbols in simple patterns that get spacial treatment - space and dash. This is due to the fact that the same steel have multiple names using those two.
E.g. O1, O 1, O-1 are all the same steel. Therefore, each pattern is analyzed if they(space,dash) are present, second pattern is generated, which has
all theoccurences removed. Thus, the search for O-2 is equal of O-2,O2 search string. If you strict matching, simply enclose pattern in double quotes.
"O-2" will search strictly for that pattern.
However, if the Name or A.k.a. field is set to - 10*,CPM* then we have two patterns, 10* matching all the steels with names that start with the string
10 and second pattern that matches all the steels that start with the string CPM. Result will be the combination of all the steels that start with either
10 or CPM. matches all the alloys those names, or alternate names(a.k.a) start with either 10 or CPM.
* can be used more than once in the pattern, e.g. the Name or A.k.a. set to the value *2* will return all of the alloys having 2 anywhere in
the name or a.k.a field.
Query engine can handle any number of pattern combinations, exact and partial matches.
Special symbols:
* - is a special symbol used in text query fields such as Name, Notes... * means Any number of Any character for that fields.
, - is a pattern separator.
Sort By - Sorts query results by the chosen column in ascending order. If Descending checkbox is checked then sort is performed in descending order.
Filtering By Chemical Elements
To filter alloys by their chemical composition check the required element's checkbox. This operation adds a condition that the alloy has
more than 0% of that element in its composition. However, how much exactly isn't tested. This also returns all the rows with ? in the element content column, since ? indicates
the presence of the element, in unknown amount.
The filter also allows to select only alloys with specific amount of the given element, or specify only lower or upper boundaries.
When only >= field has value, the condition is that the alloy has greater or at least that much % content of the given element. E.g. having C checked and 0.80 in
>= field will return all of the alloys having 0.80% or more Carbon(C) in them.
When only <= field has value, the condition is that the alloy has less or equal % content of the given element. E.g. having C checked and 0.80 in <= field will
return all of the alloys having 0.80% or less Carbon(C) in them.
Finally, when both, <= and >= have values, the alloy must have that element between min and max specified in those fields. Going back to our previous example,
C is checked, >= is set to 0.5% and <= is set to 1.5%. The query will return all the alloys with Carbon content between 0.5% and 1.5%.
The same can be done for any of the element in the database. General rules apply to all of the elements. When the given chemical element is not checked, corresponding input boxes
are disabled. Checking an element checkbox enables the min/max percentage input boxes. Acceptable values are between 0 and 100. Values outside of the valid range are discarded. If
max% is less than min% then they are automatically swapped. When both, min and max % are selected alloys with ? for that element will be discarded, since the exact amount is
unknown and therefore it can't be properly validated for the range. However, if just element checkbox is selected, then the alloys with ? for that element will also be returned,
since it it known the element is present in the alloy.
Chemical Element Effects In The
Alloy
Carbon (C) - Present in all knife steels, it is the most important hardening element. Increases the tensile strength and edge retention however, improves resistance to
wear and abrasion. added in isolation, decreases toughness. Usually one would want knife-grade steel to have >0.50% carbon, which makes it "high-carbon" steel. Low Carbon steels have up to
0.03% C, and there are mild steels with 0.03% or similar, obviously those aren't suited for knife blades.
Chromium (Cr) - Added for increased wear resistance, hardness, tensile strength, and (most importantly) for corrosion resistance. Cr foems large, complex carbides. A
steel with at least 13% chromium is typically deemed "stainless" steel, though another definition says the steel must have at least 11.5% free chromium (as opposed to
being tied up in carbides) to be considered "stainless". Despite the name, all steel can rust if not maintained properly. Adding chromium in high amounts decreases
toughness. Chromium is a carbide-former, which is why it increases wear resistance. Unfortunately, amount of the free chromium in the steels is almost never specified.
Cobalt (Co) - Increases hardness, also allows for higher quenching temperatures(during the heat treatment procedure). Intensifies the individual effects of
other elements in more complex steels. Co is not a carbide former, however adding Cobalt to the alloy allows for higher attainable hardnedd and higher red hot hardness.
Manganese (Mn) - An important element, manganese aids the grain structure, and contributes to hardenability. Also strength & wear resistance. Improves the steel,
deoxidizes and degasifies during the steel's manufacturing (hot working and rolling). Present in most cutlery steels. In larger quantities, increases hardness and brittleness.
Molybdenum (Mo): A carbide former, prevents brittleness & maintains the steel's strength at high temperatures. Improves machinability and resistance to corrosion.
Present in many steels, and air-hardening steels (e.g. A2, ATS-34) always have 1% or more Molybdenum.
Nitrogen (N) - The effect of nitrogen on steel properties can be either detrimental or beneficial, depending on the other alloying elements present, the form and
quantity of Nitrogen present, and the required behavior of the particular steel product. Although, using new technologies ultra high Nitrogen steels are developed. N substitutes C
in small amounts, or even large, for hardness. INFI has N, and there's few more, with Sandvik being the champion having 3% N in the alloy, completely substituting C. Sadly, not
available for knife makers.
Niobium (Nb) - Niobium is a strong carbide former and forms very hard, very small, simple carbides[NbC]. Improves ductility, hardness, corrosion, corrosion resistance.
Also, refines grain. Also known as Columbium.
Nickel (Ni) - Adds toughness. Present in L-6 and AUS-6 and AUS-8. Nickel is widely believed to play a role in corrosion resistance as well, but this is probably
incorrect. One more reason Ni is added to the alloy is that it creates brighter portion in damascus steels.
Oxygen (O) - Another undesirable element in the steel. Oxide comtaminants promote pitting in the steels. Essentially it is a contaminant.
Phosphorus (P) - Present in small amounts in most steels, phosphorus is a essentially a contaminant which reduces toughness. In very small amounts improves strength,
machinability, and hardness.
Sulfur (S) - Typically not desirable in cutlery steel, sulfur increases machinability, but decreases toughness.
Silicon (Si) - Contributes to strength. Like manganese, deoxidizes and degasifies to remove oxygen from molten metal.
Tungsten (W) - Scientific - Wolfram. Strongest carbide former after Nb and then V. W increases wear resistance. When combined properly with chromium or
molybdenum, tungsten will make the steel to be a high-speed steel. The high-speed steel M2 has a high amount of tungsten.
Vanadium (V) - Contributes to wear resistance and hardenability, and as a carbide former (in fact, vanadium carbides are the hardest carbides) it contributes to wear
resistance. It also refines the grain of the steel, which contributes to toughness and allows the blade to take a very sharp edge. A number of steels have vanadium, but M2, Vascowear, and CPM 10V, S90V, S125V (in order of increasing amounts) have high amounts of vanadium.
Special thanks to Cotdt for corrections and detailed info on the elements.
| 
